EN AW-1050A vs EN AC-AlSi7Mg0.3: 36% composition overlap. Significantly different materials serving different application areas.
EN AW-1050A vs EN AC-AlSi7Mg0.3
Side-by-side chemical composition and mechanical property comparison.
Overview
EN AW-1050A
3.0255
Commercially pure aluminium (99.5% min Al). Excellent corrosion resistance, thermal and electrical conductivity. Very soft and easily formed. Used for chemical plant equipment, food industry, reflectors, heat exchangers, electrical conductors, and decorative trim.
EN AC-AlSi7Mg0.3
EN AC-42100
The most important aluminum sand and gravity die casting alloy worldwide. Excellent castability, good mechanical properties after T6 heat treatment, and outstanding weldability. Si 6.5-7.5% provides excellent fluidity, Mg 0.25-0.45% enables precipitation hardening. Used for automotive wheels, suspension components, aerospace structural castings, engine brackets, and high-integrity safety-critical castings. Equivalent to ASTM A356.0 and DIN G-AlSi7Mg.
| EN AW-1050A | EN AC-AlSi7Mg0.3 | |
|---|---|---|
| Material Number | 3.0255 | EN AC-42100 |
| Category | Aluminum | Aluminum |
| Standard | EN 573-3 | EN 1706 |
Chemical composition (wt%)
| Element | EN AW-1050A | EN AC-AlSi7Mg0.3 | Overlap |
|---|---|---|---|
| Si | 0–0.25% | 6.5–7.5% | No overlap |
| Mn | 0–0.05% | ≤ 0.1% | OK |
| Cu | 0–0.05% | ≤ 0.05% | OK |
| Al | ≥ 99.5% | — | — |
Mechanical properties
| Property | EN AW-1050A | EN AC-AlSi7Mg0.3 | Unit |
|---|---|---|---|
| tensile_strength | 65–95 | ≥ 140 | MPa |
| yield_strength | ≥ 20 | ≥ 80 | MPa |
| elongation | ≥ 23 | ≥ 2 | % |
Compatibility Assessment
EN AW-1050A and EN AC-AlSi7Mg0.3 have significantly different compositions (36% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EN AW-1050A the same as EN AC-AlSi7Mg0.3?
EN AW-1050A and EN AC-AlSi7Mg0.3 have a 36% composition overlap. They are generally not directly interchangeable.
Can I replace EN AW-1050A with EN AC-AlSi7Mg0.3?
Generally not recommended. The compositions differ significantly (36% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between EN AW-1050A and EN AC-AlSi7Mg0.3?
The main differences are in the following elements: Si, Mg. EN AW-1050A is a Aluminum grade, while EN AC-AlSi7Mg0.3 is a Aluminum grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.