EN AW-1050A vs EN AW-5052: 50% composition overlap. Moderate differences, generally not direct substitutes.
EN AW-1050A vs EN AW-5052
Side-by-side chemical composition and mechanical property comparison.
Overview
EN AW-1050A
3.0255
Commercially pure aluminium (99.5% min Al). Excellent corrosion resistance, thermal and electrical conductivity. Very soft and easily formed. Used for chemical plant equipment, food industry, reflectors, heat exchangers, electrical conductors, and decorative trim.
EN AW-5052
EN AW-5052
General-purpose Al-Mg alloy — Mg 2.2-2.8%. Good balance of formability, corrosion resistance, and moderate strength (UTS 210-260 H32). Non-heat-treatable — strengthened by cold work. THE most widely used 5xxx alloy globally by tonnage. Used for sheet metal work, fuel tanks, marine components, appliances, lighting, and general fabrication. Excellent weldability.
| EN AW-1050A | EN AW-5052 | |
|---|---|---|
| Material Number | 3.0255 | EN AW-5052 |
| Category | Aluminum | Aluminum |
| Standard | EN 573-3 | EN 573-3 |
Chemical composition (wt%)
| Element | EN AW-1050A | EN AW-5052 | Overlap |
|---|---|---|---|
| Si | 0–0.25% | 0–0.25% | OK |
| Mn | 0–0.05% | — | — |
| Cr | — | 0.15–0.35% | — |
| Cu | 0–0.05% | — | — |
Mechanical properties
| Property | EN AW-1050A | EN AW-5052 | Unit |
|---|---|---|---|
| tensile_strength | 65–95 | 210–260 | MPa |
| yield_strength | ≥ 20 | 160–210 | MPa |
| elongation | ≥ 23 | 7–12 | % |
Compatibility Assessment
EN AW-1050A and EN AW-5052 have moderate differences (50% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EN AW-1050A the same as EN AW-5052?
EN AW-1050A and EN AW-5052 have a 50% composition overlap. They are generally not directly interchangeable.
Can I replace EN AW-1050A with EN AW-5052?
Generally not recommended. The compositions differ significantly (50% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between EN AW-1050A and EN AW-5052?
The main differences are in the following elements: Mg. EN AW-1050A is a Aluminum grade, while EN AW-5052 is a Aluminum grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.