10CrMo9-10 vs 30CrMo4: 33% composition overlap. Significantly different materials serving different application areas.
10CrMo9-10 vs 30CrMo4
Side-by-side chemical composition and mechanical property comparison.
Overview
10CrMo9-10
1.7380
Low-carbon Cr-Mo steel for elevated temperature pressure equipment. Excellent creep resistance up to 530°C. The standard grade for boiler tubes, headers, and pressure vessels in power generation and petrochemical industries.
30CrMo4
1.7218
Low-to-medium carbon Cr-Mo QT steel — lower C than 34CrMo4/42CrMo4 giving better weldability and toughness. THE gas cylinder and pressure vessel grade in Europe (EN ISO 9809). Good hardenability for medium sections. Also used for automotive crankshafts, gears, and high-pressure hydraulic components. AISI 4130 equivalent.
| 10CrMo9-10 | 30CrMo4 | |
|---|---|---|
| Material Number | 1.7380 | 1.7218 |
| Category | Alloy Steel | Alloy Steel |
| Standard | EN 10028-2 | EN 10083-3 |
Chemical composition (wt%)
| Element | 10CrMo9-10 | 30CrMo4 | Overlap |
|---|---|---|---|
| C | 0.08–0.14% | 0.26–0.33% | No overlap |
| Si | 0–0.5% | 0–0.4% | OK |
| Mn | 0.4–0.8% | 0.6–0.9% | Partial |
| P | 0–0.02% | 0–0.025% | OK |
Mechanical properties
| Property | 10CrMo9-10 | 30CrMo4 | Unit |
|---|---|---|---|
| tensile_strength | 450–600 | 800–950 | MPa |
| yield_strength | ≥ 280 | 600–700 | MPa |
| elongation | ≥ 18 | 14–18 | % |
Compatibility Assessment
10CrMo9-10 and 30CrMo4 have significantly different compositions (33% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 10CrMo9-10 the same as 30CrMo4?
10CrMo9-10 and 30CrMo4 have a 33% composition overlap. They are generally not directly interchangeable.
Can I replace 10CrMo9-10 with 30CrMo4?
Generally not recommended. The compositions differ significantly (33% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 10CrMo9-10 and 30CrMo4?
The main differences are in the following elements: C, Mn, Cr, Mo. 10CrMo9-10 is a Alloy Steel grade, while 30CrMo4 is a Alloy Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.