11SMnPb30 vs ASTM A36: 23% composition overlap. Significantly different materials serving different application areas.
11SMnPb30 vs ASTM A36
Side-by-side chemical composition and mechanical property comparison.
Overview
11SMnPb30
1.0718
Leaded free-cutting steel — the highest machinability rating among carbon steels. Pb+S combination gives excellent chip breaking and surface finish. The standard grade for high-volume automatic lathe parts. Used for screws, nuts, bolts, bushings, pins, and automotive turned parts. ≈ AISI 12L14.
ASTM A36
K02600
The most common structural carbon steel in the US. Low carbon content with good weldability and machinability. Used for buildings, bridges, construction equipment, and general structural purposes. Minimum yield strength 36 ksi (250 MPa).
| 11SMnPb30 | ASTM A36 | |
|---|---|---|
| Material Number | 1.0718 | K02600 |
| Category | Carbon Steel | Carbon Steel |
| Standard | EN 10087 | ASTM A36/A36M |
Chemical composition (wt%) — Pro
| Element | 11SMnPb30 | ASTM A36 | Overlap |
|---|---|---|---|
| C | 0–0.14% | 0–0.26% | OK |
| Si | 0–0.05% | 0–0.4% | OK |
| Mn | 0.9–1.3% | 0–1.03% | Partial |
| P | 0–0.11% | 0–0.04% | OK |
| S | |||
| Cu | |||
| Pb |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | 11SMnPb30 | ASTM A36 | Unit |
|---|---|---|---|
| Tensile Strength | 460–710 | 400–550 | MPa |
| Yield Strength | ≥ 375 | ≥ 250 | MPa |
| Elongation | ≥ 8 | ≥ 20 | % |
| Hardness HB | |||
| Elastic Modulus | |||
| Density |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
11SMnPb30 and ASTM A36 have significantly different compositions (23% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 11SMnPb30 the same as ASTM A36?
11SMnPb30 and ASTM A36 have a 23% composition overlap. They are generally not directly interchangeable.
Can I replace 11SMnPb30 with ASTM A36?
Generally not recommended. The compositions differ significantly (23% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 11SMnPb30 and ASTM A36?
The main differences are in the following elements: Mn, S. 11SMnPb30 is a Carbon Steel grade, while ASTM A36 is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.