11SMnPb30 vs C35: 10% composition overlap. Significantly different materials serving different application areas.
11SMnPb30 vs C35
Side-by-side chemical composition and mechanical property comparison.
Overview
11SMnPb30
1.0718
Leaded free-cutting steel — the highest machinability rating among carbon steels. Pb+S combination gives excellent chip breaking and surface finish. The standard grade for high-volume automatic lathe parts. Used for screws, nuts, bolts, bushings, pins, and automotive turned parts. ≈ AISI 12L14.
C35
1.0501
Medium-carbon unalloyed steel with moderate strength. Good machinability and weldability. Used for lightly stressed components like levers, axles, bolts, and general machine parts.
| 11SMnPb30 | C35 | |
|---|---|---|
| Material Number | 1.0718 | 1.0501 |
| Category | Carbon Steel | Carbon Steel |
| Standard | EN 10087 | EN 10083-2 |
Chemical composition (wt%) — Pro
| Element | 11SMnPb30 | C35 | Overlap |
|---|---|---|---|
| C | 0–0.14% | 0.32–0.39% | No overlap |
| Si | 0–0.05% | 0–0.4% | OK |
| Mn | 0.9–1.3% | 0.5–0.8% | No overlap |
| P | 0–0.11% | 0–0.03% | OK |
| S | |||
| Pb |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | 11SMnPb30 | C35 | Unit |
|---|---|---|---|
| Tensile Strength | 460–710 | 550–700 | MPa |
| Yield Strength | ≥ 375 | ≥ 300 | MPa |
| Elongation | ≥ 8 | ≥ 18 | % |
| Hardness HB | |||
| Elastic Modulus | |||
| Density |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
11SMnPb30 and C35 have significantly different compositions (10% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 11SMnPb30 the same as C35?
11SMnPb30 and C35 have a 10% composition overlap. They are generally not directly interchangeable.
Can I replace 11SMnPb30 with C35?
Generally not recommended. The compositions differ significantly (10% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 11SMnPb30 and C35?
The main differences are in the following elements: C, Mn, S. 11SMnPb30 is a Carbon Steel grade, while C35 is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.