11SMnPb30 vs S235JR: 26% composition overlap. Significantly different materials serving different application areas.
11SMnPb30 vs S235JR
Side-by-side chemical composition and mechanical property comparison.
Overview
11SMnPb30
1.0718
Leaded free-cutting steel — the highest machinability rating among carbon steels. Pb+S combination gives excellent chip breaking and surface finish. The standard grade for high-volume automatic lathe parts. Used for screws, nuts, bolts, bushings, pins, and automotive turned parts. ≈ AISI 12L14.
S235JR
1.0038
General-purpose structural steel with minimum yield strength of 235 MPa. The most common structural steel grade in Europe for general construction, frames, and non-critical structural applications.
| 11SMnPb30 | S235JR | |
|---|---|---|
| Material Number | 1.0718 | 1.0038 |
| Category | Carbon Steel | Carbon Steel |
| Standard | EN 10087 | EN 10025-2 |
Chemical composition (wt%)
| Element | 11SMnPb30 | S235JR | Overlap |
|---|---|---|---|
| C | 0–0.14% | 0–0.17% | OK |
| Si | 0–0.05% | 0–0.4% | OK |
| Mn | 0.9–1.3% | 0–1.4% | OK |
| P | 0–0.11% | 0–0.035% | OK |
Mechanical properties
| Property | 11SMnPb30 | S235JR | Unit |
|---|---|---|---|
| tensile_strength | 460–710 | 360–510 | MPa |
| yield_strength | ≥ 375 | ≥ 235 | MPa |
| elongation | ≥ 8 | ≥ 26 | % |
Compatibility Assessment
11SMnPb30 and S235JR have significantly different compositions (26% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 11SMnPb30 the same as S235JR?
11SMnPb30 and S235JR have a 26% composition overlap. They are generally not directly interchangeable.
Can I replace 11SMnPb30 with S235JR?
Generally not recommended. The compositions differ significantly (26% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 11SMnPb30 and S235JR?
The main differences are in the following elements: S. 11SMnPb30 is a Carbon Steel grade, while S235JR is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.