23MnB4 vs 34CrNiMo6: 42% composition overlap. Significantly different materials serving different application areas.
23MnB4 vs 34CrNiMo6
Side-by-side chemical composition and mechanical property comparison.
Overview
23MnB4
1.5535
Cold-heading boron steel — optimized for cold forming of high-strength fasteners. Boron gives hardenability equivalent to much more expensive Cr-Mo alloys. Supplied spheroidized for cold heading, then quenched+tempered after forming. Property class 10.9 bolts are commonly made from this grade. Used for high-strength bolts (M8-M24), screws, studs, and threaded fasteners for automotive and construction.
34CrNiMo6
1.6582
High-strength quenched and tempered Cr-Ni-Mo steel. Excellent hardenability and toughness, suitable for large cross-sections. Used for heavy-duty shafts, gears, turbine parts, and aerospace components.
| 23MnB4 | 34CrNiMo6 | |
|---|---|---|
| Material Number | 1.5535 | 1.6582 |
| Category | Alloy Steel | Alloy Steel |
| Standard | EN 10263-4 | EN 10083-3 |
Chemical composition (wt%)
| Element | 23MnB4 | 34CrNiMo6 | Overlap |
|---|---|---|---|
| C | 0.2–0.27% | 0.3–0.38% | No overlap |
| Si | 0–0.4% | 0–0.4% | OK |
| Mn | 0.8–1.1% | 0.5–0.8% | Partial |
| P | 0–0.025% | 0–0.025% | OK |
Mechanical properties
| Property | 23MnB4 | 34CrNiMo6 | Unit |
|---|---|---|---|
| tensile_strength | 830–1040 | 1000–1200 | MPa |
| yield_strength | 660–830 | ≥ 800 | MPa |
| elongation | 9–14 | ≥ 11 | % |
Compatibility Assessment
23MnB4 and 34CrNiMo6 have significantly different compositions (42% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 23MnB4 the same as 34CrNiMo6?
23MnB4 and 34CrNiMo6 have a 42% composition overlap. They are generally not directly interchangeable.
Can I replace 23MnB4 with 34CrNiMo6?
Generally not recommended. The compositions differ significantly (42% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 23MnB4 and 34CrNiMo6?
The main differences are in the following elements: C, Mn. 23MnB4 is a Alloy Steel grade, while 34CrNiMo6 is a Alloy Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.