303 vs 316Ti: 63% composition overlap. Moderate differences, generally not direct substitutes.
303 vs 316Ti
Side-by-side chemical composition and mechanical property comparison.
Overview
303
1.4305
Free-machining austenitic stainless steel — the most machinable of all austenitic grades. 0.15-0.35% S (as MnS inclusions) provides excellent chip-breaking. Trade-off: lower corrosion resistance than 304, poor weldability (hot cracking risk), and not suitable for cold forming. Used for high-volume automatic lathe parts: fittings, valves, screws, shafts, and precision components.
316Ti
1.4571
Titanium-stabilized austenitic stainless steel with molybdenum. Stabilization prevents sensitization during prolonged high-temperature exposure. Very popular in Germany for chemical, pharmaceutical, and food processing. Being replaced internationally by 316L (1.4404) for most applications.
| 303 | 316Ti | |
|---|---|---|
| Material Number | 1.4305 | 1.4571 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-3 | EN 10088-2 |
Chemical composition (wt%)
| Element | 303 | 316Ti | Overlap |
|---|---|---|---|
| C | 0–0.1% | 0–0.08% | OK |
| Si | 0–1% | 0–1% | OK |
| Mn | 0–2% | 0–2% | OK |
| P | 0–0.045% | 0–0.045% | OK |
Mechanical properties
| Property | 303 | 316Ti | Unit |
|---|---|---|---|
| tensile_strength | 500–750 | 500–700 | MPa |
| yield_strength | ≥ 190 | ≥ 200 | MPa |
| elongation | ≥ 35 | ≥ 40 | % |
Compatibility Assessment
303 and 316Ti have moderate differences (63% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 303 the same as 316Ti?
303 and 316Ti have a 63% composition overlap. They are generally not directly interchangeable.
Can I replace 303 with 316Ti?
Generally not recommended. The compositions differ significantly (63% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 303 and 316Ti?
The main differences are in the following elements: S, Cr, Ni. 303 is a Stainless Steel grade, while 316Ti is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.