30NiCrMo16-6 vs EN-GJS-400-15: 26% composition overlap. Significantly different materials serving different application areas.
30NiCrMo16-6 vs EN-GJS-400-15
Side-by-side chemical composition and mechanical property comparison.
Overview
30NiCrMo16-6
1.6747
Ultra-high-strength nickel-chromium-molybdenum steel with outstanding through-hardenability for large cross-sections. Achieves tensile strengths of 1080–1270 MPa (dia ≤40mm) with excellent impact toughness. Very high Jominy hardenability (47–55 HRC). Used for heavy-duty crankshafts, connecting rods, bolts, gear shafts, and critical aerospace structural parts. AFNOR equivalent: 35NCD16.
EN-GJS-400-15
5.3106
Ferritic ductile (spheroidal graphite) cast iron with minimum tensile strength 400 MPa and minimum elongation 15%. The most widely used ductile iron grade worldwide. Spheroidal graphite morphology achieved by magnesium treatment provides far superior ductility and impact resistance compared to grey iron. Used for water and gas pipes, valve bodies, pump housings, automotive components, gearbox housings, and general engineering castings. Equivalent to DIN GGG40, ASTM A536 60-40-18, JIS FCD400.
| 30NiCrMo16-6 | EN-GJS-400-15 | |
|---|---|---|
| Material Number | 1.6747 | 5.3106 |
| Category | Alloy Steel | Alloy Steel |
| Standard | EN 10083-3 | EN 1563 |
Chemical composition (wt%)
| Element | 30NiCrMo16-6 | EN-GJS-400-15 | Overlap |
|---|---|---|---|
| C | 0.26–0.33% | 3.2–3.8% | No overlap |
| Si | ≤ 0.4% | 2.2–2.8% | No overlap |
| Mn | 0.5–0.8% | 0.1–0.3% | No overlap |
| P | ≤ 0.025% | ≤ 0.05% | OK |
Mechanical properties
| Property | 30NiCrMo16-6 | EN-GJS-400-15 | Unit |
|---|---|---|---|
| tensile_strength | 1080–1270 | ≥ 400 | MPa |
| yield_strength | ≥ 880 | ≥ 250 | MPa |
| elongation | ≥ 10 | ≥ 15 | % |
Compatibility Assessment
30NiCrMo16-6 and EN-GJS-400-15 have significantly different compositions (26% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 30NiCrMo16-6 the same as EN-GJS-400-15?
30NiCrMo16-6 and EN-GJS-400-15 have a 26% composition overlap. They are generally not directly interchangeable.
Can I replace 30NiCrMo16-6 with EN-GJS-400-15?
Generally not recommended. The compositions differ significantly (26% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 30NiCrMo16-6 and EN-GJS-400-15?
The main differences are in the following elements: C, Si, Mn. 30NiCrMo16-6 is a Alloy Steel grade, while EN-GJS-400-15 is a Alloy Steel grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.