316 / X5CrNiMo17-12-2 vs X2CrNiMoN22-5-3: 47% composition overlap. Significantly different materials serving different application areas.
316 / X5CrNiMo17-12-2 vs X2CrNiMoN22-5-3
Side-by-side chemical composition and mechanical property comparison.
Overview
316 / X5CrNiMo17-12-2
1.4401
Standard-carbon austenitic stainless steel with molybdenum. Higher C than 316L (max 0.07% vs 0.03%) giving slightly higher strength. Same corrosion resistance as 316L. Used where welding is not required or post-weld solution annealing is possible.
X2CrNiMoN22-5-3
1.4462
The most widely used duplex stainless steel worldwide (SAF 2205 / UNS S31803/S32205). Austenitic-ferritic microstructure provides ~2× yield strength of 304/316 (≥450 MPa) with excellent resistance to stress corrosion cracking, pitting (PREN 33-38), and intergranular corrosion. Service temperature -50°C to 300°C. Used for oil & gas production tubing, chemical processing vessels, desalination plants, pulp & paper digesters, heat exchangers, and bridge structures. Weldable with ER2209 filler.
| 316 / X5CrNiMo17-12-2 | X2CrNiMoN22-5-3 | |
|---|---|---|
| Material Number | 1.4401 | 1.4462 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-2 |
Chemical composition (wt%)
| Element | 316 / X5CrNiMo17-12-2 | X2CrNiMoN22-5-3 | Overlap |
|---|---|---|---|
| C | 0–0.07% | ≤ 0.03% | OK |
| Si | 0–1% | ≤ 1% | OK |
| Mn | 0–2% | ≤ 2% | OK |
| P | 0–0.045% | ≤ 0.035% | OK |
Mechanical properties
| Property | 316 / X5CrNiMo17-12-2 | X2CrNiMoN22-5-3 | Unit |
|---|---|---|---|
| tensile_strength | 530–680 | 650–880 | MPa |
| yield_strength | ≥ 220 | ≥ 450 | MPa |
| elongation | ≥ 40 | ≥ 25 | % |
Compatibility Assessment
316 / X5CrNiMo17-12-2 and X2CrNiMoN22-5-3 have significantly different compositions (47% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 316 / X5CrNiMo17-12-2 the same as X2CrNiMoN22-5-3?
316 / X5CrNiMo17-12-2 and X2CrNiMoN22-5-3 have a 47% composition overlap. They are generally not directly interchangeable.
Can I replace 316 / X5CrNiMo17-12-2 with X2CrNiMoN22-5-3?
Generally not recommended. The compositions differ significantly (47% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 316 / X5CrNiMo17-12-2 and X2CrNiMoN22-5-3?
The main differences are in the following elements: Cr, Mo, Ni, N. 316 / X5CrNiMo17-12-2 is a Stainless Steel grade, while X2CrNiMoN22-5-3 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.