316Ti vs X46Cr13: 56% composition overlap. Moderate differences, generally not direct substitutes.
316Ti vs X46Cr13
Side-by-side chemical composition and mechanical property comparison.
Overview
316Ti
1.4571
Titanium-stabilized austenitic stainless steel with molybdenum. Stabilization prevents sensitization during prolonged high-temperature exposure. Very popular in Germany for chemical, pharmaceutical, and food processing. Being replaced internationally by 316L (1.4404) for most applications.
X46Cr13
1.4034
Martensitic chromium stainless steel with high carbon content (0.43-0.50%) and 12.5-14.5% Cr. The highest carbon grade in the basic Cr13 martensitic series. Achieves hardness up to 56 HRC. Good compromise between hardness and corrosion resistance. Equivalent to AISI 420C/420HC. Used for knife blades, surgical instruments, razor blades, CO2 capture pipes, and precision cutting tools. Good polishing capability.
| 316Ti | X46Cr13 | |
|---|---|---|
| Material Number | 1.4571 | 1.4034 |
| Category | Stainless Steel | Stainless Steel |
| Standard | EN 10088-2 | EN 10088-2 |
Chemical composition (wt%)
| Element | 316Ti | X46Cr13 | Overlap |
|---|---|---|---|
| C | 0–0.08% | 0.43–0.5% | No overlap |
| Si | 0–1% | ≤ 1% | OK |
| Mn | 0–2% | ≤ 1% | OK |
| P | 0–0.045% | ≤ 0.04% | OK |
Mechanical properties
| Property | 316Ti | X46Cr13 | Unit |
|---|---|---|---|
| tensile_strength | 500–700 | ≥ 900 | MPa |
| yield_strength | ≥ 200 | ≥ 700 | MPa |
| elongation | ≥ 40 | ≥ 8 | % |
Compatibility Assessment
316Ti and X46Cr13 have moderate differences (56% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 316Ti the same as X46Cr13?
316Ti and X46Cr13 have a 56% composition overlap. They are generally not directly interchangeable.
Can I replace 316Ti with X46Cr13?
Generally not recommended. The compositions differ significantly (56% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 316Ti and X46Cr13?
The main differences are in the following elements: C, Cr. 316Ti is a Stainless Steel grade, while X46Cr13 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.