A2 / X100CrMoV5 vs ASP 2030 (PM High Speed Steel): 10% composition overlap. Significantly different materials serving different application areas.
A2 / X100CrMoV5 vs ASP 2030 (PM High Speed Steel)
Side-by-side chemical composition and mechanical property comparison.
Overview
A2 / X100CrMoV5
1.2363
Air-hardening cold-work tool steel. Combines good wear resistance with excellent dimensional stability during heat treatment (minimal distortion). Used for punching/blanking dies, forming tools, shear blades, gauges, and precision tooling where low distortion is critical.
ASP 2030 (PM High Speed Steel)
Powder metallurgy high speed steel by Erasteel (now Zapp). Co-free PM-HSS with excellent combination of wear resistance and toughness. C 1.28%, Cr 4.2%, Mo 5.0%, W 6.4%, V 3.1%. Hardness 64–67 HRC. Superior carbide distribution vs conventional HSS. Applications: end mills, drills, taps, broaches, cold forging punches, fine blanking tools. Alternative to M42 and S390.
| A2 / X100CrMoV5 | ASP 2030 (PM High Speed Steel) | |
|---|---|---|
| Material Number | 1.2363 | — |
| Category | Tool Steel | Tool Steel |
| Standard | EN ISO 4957 | Erasteel |
Chemical composition (wt%) — Pro
| Element | A2 / X100CrMoV5 | ASP 2030 (PM High Speed Steel) | Overlap |
|---|---|---|---|
| C | 0.95–1.05% | 1.25–1.32% | No overlap |
| Si | 0.1–0.4% | ≤ 0.5% | OK |
| Mn | 0.4–0.8% | ≤ 0.4% | Partial |
| Cr | 4.8–5.5% | 4–4.5% | No overlap |
| Mo | |||
| V | |||
| W |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | A2 / X100CrMoV5 | ASP 2030 (PM High Speed Steel) | Unit |
|---|---|---|---|
| Hardness HRC | 57–62 | — | HRC |
| Hardness HB | ≤ 229 | — | HB |
| Elastic Modulus | ≥ 210 | — | GPa |
| Density | |||
| hardness_brinell | |||
| hardness_rockwell |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
A2 / X100CrMoV5 and ASP 2030 (PM High Speed Steel) have significantly different compositions (10% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is A2 / X100CrMoV5 the same as ASP 2030 (PM High Speed Steel)?
A2 / X100CrMoV5 and ASP 2030 (PM High Speed Steel) have a 10% composition overlap. They are generally not directly interchangeable.
Can I replace A2 / X100CrMoV5 with ASP 2030 (PM High Speed Steel)?
Generally not recommended. The compositions differ significantly (10% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between A2 / X100CrMoV5 and ASP 2030 (PM High Speed Steel)?
The main differences are in the following elements: C, Mn, Cr, Mo. A2 / X100CrMoV5 is a Tool Steel grade, while ASP 2030 (PM High Speed Steel) is a Tool Steel grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.