ASTM A36 vs C75: 38% composition overlap. Significantly different materials serving different application areas.
ASTM A36 vs C75
Side-by-side chemical composition and mechanical property comparison.
Overview
ASTM A36
K02600
The most common structural carbon steel in the US. Low carbon content with good weldability and machinability. Used for buildings, bridges, construction equipment, and general structural purposes. Minimum yield strength 36 ksi (250 MPa).
C75
1.0605
High-carbon unalloyed spring steel. Near-eutectoid composition (0.70-0.80% C). Excellent elastic properties after hardening and tempering. Limited hardenability — effective oil quench diameter ≤12mm. Cost-effective for small/medium springs. Used for spring wire, clock springs, saw blades, retaining rings, and precision strip springs. ≈ AISI 1075.
| ASTM A36 | C75 | |
|---|---|---|
| Material Number | K02600 | 1.0605 |
| Category | Carbon Steel | Carbon Steel |
| Standard | ASTM A36/A36M | EN 10132-4 |
Chemical composition (wt%)
| Element | ASTM A36 | C75 | Overlap |
|---|---|---|---|
| C | 0–0.26% | 0.7–0.8% | No overlap |
| Si | 0–0.4% | 0.15–0.35% | OK |
| Mn | 0–1.03% | 0.6–0.9% | OK |
| P | 0–0.04% | 0–0.025% | OK |
Mechanical properties
| Property | ASTM A36 | C75 | Unit |
|---|---|---|---|
| tensile_strength | 400–550 | 850–1100 | MPa |
| yield_strength | ≥ 250 | 500–700 | MPa |
| elongation | ≥ 20 | 8–12 | % |
Compatibility Assessment
ASTM A36 and C75 have significantly different compositions (38% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASTM A36 the same as C75?
ASTM A36 and C75 have a 38% composition overlap. They are generally not directly interchangeable.
Can I replace ASTM A36 with C75?
Generally not recommended. The compositions differ significantly (38% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASTM A36 and C75?
The main differences are in the following elements: C. ASTM A36 is a Carbon Steel grade, while C75 is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.