ASTM A36 vs P235GH: 65% composition overlap. Moderate differences, generally not direct substitutes.
ASTM A36 vs P235GH
Side-by-side chemical composition and mechanical property comparison.
Overview
ASTM A36
K02600
The most common structural carbon steel in the US. Low carbon content with good weldability and machinability. Used for buildings, bridges, construction equipment, and general structural purposes. Minimum yield strength 36 ksi (250 MPa).
P235GH
1.0345
Lowest-strength pressure vessel steel — ReH >=235 MPa. Excellent weldability due to very low C (max 0.16%). THE entry-level boiler/pressure vessel plate in EN 10028-2. Used for low-pressure vessels, boiler drums, heat exchangers, and steam piping at modest pressures and temperatures to ~400°C.
| ASTM A36 | P235GH | |
|---|---|---|
| Material Number | K02600 | 1.0345 |
| Category | Carbon Steel | Carbon Steel |
| Standard | ASTM A36/A36M | EN 10028-2 |
Chemical composition (wt%)
| Element | ASTM A36 | P235GH | Overlap |
|---|---|---|---|
| C | 0–0.26% | 0–0.16% | OK |
| Si | 0–0.4% | 0–0.35% | OK |
| Mn | 0–1.03% | 0–1.2% | OK |
| P | 0–0.04% | 0–0.025% | OK |
Mechanical properties
| Property | ASTM A36 | P235GH | Unit |
|---|---|---|---|
| tensile_strength | 400–550 | 360–480 | MPa |
| yield_strength | ≥ 250 | ≥ 235 | MPa |
| elongation | ≥ 20 | ≥ 25 | % |
Compatibility Assessment
ASTM A36 and P235GH have moderate differences (65% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASTM A36 the same as P235GH?
ASTM A36 and P235GH have a 65% composition overlap. They are generally not directly interchangeable.
Can I replace ASTM A36 with P235GH?
Generally not recommended. The compositions differ significantly (65% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASTM A36 and P235GH?
The main differences are in the following elements: overall alloying content. ASTM A36 is a Carbon Steel grade, while P235GH is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.