ASTM A36 vs S275J0: 55% composition overlap. Moderate differences, generally not direct substitutes.
ASTM A36 vs S275J0
Side-by-side chemical composition and mechanical property comparison.
Overview
ASTM A36
K02600
The most common structural carbon steel in the US. Low carbon content with good weldability and machinability. Used for buildings, bridges, construction equipment, and general structural purposes. Minimum yield strength 36 ksi (250 MPa).
S275J0
1.0143
Structural steel with guaranteed Charpy impact at 0°C (KV >=27J). Between S235J0 and S355J0 in the strength range. ReH >=275 MPa. Very widely used in European construction: building frames, columns, beams, and general structural applications. Good weldability. Often specified as standard section material (IPE, HEA, UPN profiles).
| ASTM A36 | S275J0 | |
|---|---|---|
| Material Number | K02600 | 1.0143 |
| Category | Carbon Steel | Carbon Steel |
| Standard | ASTM A36/A36M | EN 10025-2 |
Chemical composition (wt%)
| Element | ASTM A36 | S275J0 | Overlap |
|---|---|---|---|
| C | 0–0.26% | 0–0.18% | OK |
| Si | 0–0.4% | ≥ 0% | OK |
| Mn | 0–1.03% | 0–1.5% | OK |
| P | 0–0.04% | 0–0.03% | OK |
Mechanical properties
| Property | ASTM A36 | S275J0 | Unit |
|---|---|---|---|
| tensile_strength | 400–550 | 410–560 | MPa |
| yield_strength | ≥ 250 | ≥ 275 | MPa |
| elongation | ≥ 20 | ≥ 21 | % |
Compatibility Assessment
ASTM A36 and S275J0 have moderate differences (55% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASTM A36 the same as S275J0?
ASTM A36 and S275J0 have a 55% composition overlap. They are generally not directly interchangeable.
Can I replace ASTM A36 with S275J0?
Generally not recommended. The compositions differ significantly (55% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASTM A36 and S275J0?
The main differences are in the following elements: overall alloying content. ASTM A36 is a Carbon Steel grade, while S275J0 is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.