ASTM A572 Grade 50 vs S700MC: 54% composition overlap. Moderate differences, generally not direct substitutes.
ASTM A572 Grade 50 vs S700MC
Side-by-side chemical composition and mechanical property comparison.
Overview
ASTM A572 Grade 50
The most widely used structural steel grade in the United States. 345 MPa (50 ksi) yield strength HSLA steel. Has largely replaced A36 for structural applications due to higher strength-to-weight ratio. Used for building frames, bridges, heavy equipment, and general structural fabrication.
S700MC
1.8974
The highest-strength grade in the EN 10149-2 HSLA series. 700 MPa yield with good cold formability. TMCP for ultra-fine grain structure. Used for telescopic cranes, truck frame rails, dirt-moving equipment, farm equipment, and any application requiring maximum weight reduction in cold-formed steel.
| ASTM A572 Grade 50 | S700MC | |
|---|---|---|
| Material Number | — | 1.8974 |
| Category | Carbon Steel | Carbon Steel |
| Standard | ASTM A572 | EN 10149-2 |
Chemical composition (wt%)
| Element | ASTM A572 Grade 50 | S700MC | Overlap |
|---|---|---|---|
| C | 0–0.23% | 0–0.12% | OK |
| Si | 0–0.4% | 0–0.6% | OK |
| Mn | 0–1.35% | 0–2.1% | OK |
| P | 0–0.04% | 0–0.025% | OK |
Mechanical properties
| Property | ASTM A572 Grade 50 | S700MC | Unit |
|---|---|---|---|
| tensile_strength | ≥ 450 | 750–950 | MPa |
| yield_strength | ≥ 345 | ≥ 700 | MPa |
| elongation | ≥ 18 | ≥ 12 | % |
Compatibility Assessment
ASTM A572 Grade 50 and S700MC have moderate differences (54% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASTM A572 Grade 50 the same as S700MC?
ASTM A572 Grade 50 and S700MC have a 54% composition overlap. They are generally not directly interchangeable.
Can I replace ASTM A572 Grade 50 with S700MC?
Generally not recommended. The compositions differ significantly (54% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASTM A572 Grade 50 and S700MC?
The main differences are in the following elements: overall alloying content. ASTM A572 Grade 50 is a Carbon Steel grade, while S700MC is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.