ASTM A588 (Corten) vs P355NL: 51% composition overlap. Moderate differences, generally not direct substitutes.
ASTM A588 (Corten) vs P355NL
Side-by-side chemical composition and mechanical property comparison.
Overview
ASTM A588 (Corten)
High-strength low-alloy weathering steel. Forms a stable protective rust patina eliminating the need for paint. Cu-Cr-Ni-V composition provides 4-8x atmospheric corrosion resistance vs carbon steel. Used for unpainted bridges, architectural facades, sculptures, outdoor structures, and freight cars.
P355NL
1.0566
Normalized pressure vessel steel with low-temperature toughness — ReH >=355 MPa, Charpy at -40°C (KV >=27J). "NL" = Normalized + Low-temperature. Used for pressure vessels, storage tanks, and process equipment operating in cold environments (LPG, cryogenic). EN 10028-3 + PED compliant.
| ASTM A588 (Corten) | P355NL | |
|---|---|---|
| Material Number | — | 1.0566 |
| Category | Carbon Steel | Carbon Steel |
| Standard | ASTM A588 | EN 10028-3 |
Chemical composition (wt%)
| Element | ASTM A588 (Corten) | P355NL | Overlap |
|---|---|---|---|
| C | 0–0.19% | 0–0.18% | OK |
| Si | 0.3–0.65% | 0–0.5% | Partial |
| Mn | 0.8–1.25% | 1–1.7% | Partial |
| P | 0–0.04% | — | — |
Mechanical properties
| Property | ASTM A588 (Corten) | P355NL | Unit |
|---|---|---|---|
| tensile_strength | ≥ 485 | 490–630 | MPa |
| yield_strength | ≥ 345 | ≥ 355 | MPa |
| elongation | ≥ 18 | ≥ 20 | % |
Compatibility Assessment
ASTM A588 (Corten) and P355NL have moderate differences (51% overlap). They are generally not direct substitutes. Consider the specific requirements of your application.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASTM A588 (Corten) the same as P355NL?
ASTM A588 (Corten) and P355NL have a 51% composition overlap. They are generally not directly interchangeable.
Can I replace ASTM A588 (Corten) with P355NL?
Generally not recommended. The compositions differ significantly (51% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASTM A588 (Corten) and P355NL?
The main differences are in the following elements: Si, Mn. ASTM A588 (Corten) is a Carbon Steel grade, while P355NL is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.