Alloy 28 / Sanicro 28 vs Hastelloy X: 20% composition overlap. Significantly different materials serving different application areas.
Alloy 28 / Sanicro 28 vs Hastelloy X
Side-by-side chemical composition and mechanical property comparison.
Overview
Alloy 28 / Sanicro 28
1.4563
Super-austenitic stainless steel (Fe-31Ni-27Cr-3.5Mo-1Cu) with ultra-low carbon. Exceptional resistance to sulfuric acid, phosphoric acid, and chloride stress corrosion cracking. Solution-annealed: Rm 500–750 MPa, Rp0.2 ≥220 MPa, A ≥35%. Density 8.0 g/cm³, PREN ~39–47. UNS N08028, ASTM B709/B668. Applications: phosphoric acid evaporators, sulfuric acid piping, oil/gas sour service (NACE MR0175), seawater heat exchangers, nuclear fuel reprocessing. Alleima trade name Sanicro 28.
Hastelloy X
2.4665
Nickel-chromium-iron-molybdenum solid-solution superalloy — exceptional combination of oxidation resistance, fabricability, and high-temperature strength. NOT age-hardenable (solid-solution only). Oxidation-resistant to 1200°C, good ductility after 16000h at 650-870°C. Outstanding formability and weldability for a superalloy. Used for gas turbine combustor cans, transition ducts, afterburners, furnace hardware, and petrochemical process equipment.
| Alloy 28 / Sanicro 28 | Hastelloy X | |
|---|---|---|
| Material Number | 1.4563 | 2.4665 |
| Category | Nickel Alloys | Nickel Alloys |
| Standard | EN 10088 / ASTM B709 | ASTM B435 |
Chemical composition (wt%)
| Element | Alloy 28 / Sanicro 28 | Hastelloy X | Overlap |
|---|---|---|---|
| C | ≤ 0.02% | 0.05–0.15% | No overlap |
| Si | ≤ 1% | 0–1% | OK |
| Mn | ≤ 2.5% | 0–1% | OK |
| Cr | 26–28% | 20.5–23% | No overlap |
Mechanical properties
| Property | Alloy 28 / Sanicro 28 | Hastelloy X | Unit |
|---|---|---|---|
| tensile_strength | 500–750 | 690–760 | MPa |
| yield_strength | ≥ 220 | 275–345 | MPa |
| elongation | ≥ 35 | 35–45 | % |
Compatibility Assessment
Alloy 28 / Sanicro 28 and Hastelloy X have significantly different compositions (20% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is Alloy 28 / Sanicro 28 the same as Hastelloy X?
Alloy 28 / Sanicro 28 and Hastelloy X have a 20% composition overlap. They are generally not directly interchangeable.
Can I replace Alloy 28 / Sanicro 28 with Hastelloy X?
Generally not recommended. The compositions differ significantly (20% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between Alloy 28 / Sanicro 28 and Hastelloy X?
The main differences are in the following elements: C, Cr, Mo, Fe. Alloy 28 / Sanicro 28 is a Nickel Alloys grade, while Hastelloy X is a Nickel Alloys grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.