Alloy 28 / Sanicro 28 vs Inconel 625: 13% composition overlap. Significantly different materials serving different application areas.
Alloy 28 / Sanicro 28 vs Inconel 625
Side-by-side chemical composition and mechanical property comparison.
Overview
Alloy 28 / Sanicro 28
1.4563
Super-austenitic stainless steel (Fe-31Ni-27Cr-3.5Mo-1Cu) with ultra-low carbon. Exceptional resistance to sulfuric acid, phosphoric acid, and chloride stress corrosion cracking. Solution-annealed: Rm 500–750 MPa, Rp0.2 ≥220 MPa, A ≥35%. Density 8.0 g/cm³, PREN ~39–47. UNS N08028, ASTM B709/B668. Applications: phosphoric acid evaporators, sulfuric acid piping, oil/gas sour service (NACE MR0175), seawater heat exchangers, nuclear fuel reprocessing. Alleima trade name Sanicro 28.
Inconel 625
2.4856
Nickel-chromium-molybdenum-niobium superalloy. Solid-solution strengthened (no precipitation hardening required). Outstanding corrosion resistance from cryogenic to 982°C. Used for jet engine exhaust systems, marine components, chemical processing, flare stacks, and nuclear applications.
| Alloy 28 / Sanicro 28 | Inconel 625 | |
|---|---|---|
| Material Number | 1.4563 | 2.4856 |
| Category | Nickel Alloys | Nickel Alloys |
| Standard | EN 10088 / ASTM B709 | ASTM B443 |
Chemical composition (wt%)
| Element | Alloy 28 / Sanicro 28 | Inconel 625 | Overlap |
|---|---|---|---|
| C | ≤ 0.02% | 0–0.1% | OK |
| Si | ≤ 1% | 0–0.5% | OK |
| Mn | ≤ 2.5% | 0–0.5% | OK |
| Cr | 26–28% | 20–23% | No overlap |
Mechanical properties
| Property | Alloy 28 / Sanicro 28 | Inconel 625 | Unit |
|---|---|---|---|
| tensile_strength | 500–750 | ≥ 827 | MPa |
| yield_strength | ≥ 220 | ≥ 414 | MPa |
| elongation | ≥ 35 | ≥ 30 | % |
Compatibility Assessment
Alloy 28 / Sanicro 28 and Inconel 625 have significantly different compositions (13% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is Alloy 28 / Sanicro 28 the same as Inconel 625?
Alloy 28 / Sanicro 28 and Inconel 625 have a 13% composition overlap. They are generally not directly interchangeable.
Can I replace Alloy 28 / Sanicro 28 with Inconel 625?
Generally not recommended. The compositions differ significantly (13% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between Alloy 28 / Sanicro 28 and Inconel 625?
The main differences are in the following elements: Cr, Mo, Ni, Fe. Alloy 28 / Sanicro 28 is a Nickel Alloys grade, while Inconel 625 is a Nickel Alloys grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.