ASA (Acrylonitrile-Styrene-Acrylate) vs PA6 (Nylon 6): 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PA6 (Nylon 6)
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PA6 (Nylon 6)
Polyamide 6 (Nylon 6) — the most widely used engineering thermoplastic. Excellent combination of mechanical strength, toughness, wear resistance, and chemical resistance. Properties are moisture-sensitive — conditioned (50% RH) values are significantly lower than dry values. Trade names include Ultramid B (BASF), Akulon (DSM), Zytel (DuPont). Used for gears, bearings, bushings, cable ties, structural brackets, and automotive under-hood components.
| ASA (Acrylonitrile-Styrene-Acrylate) | PA6 (Nylon 6) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 10350 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PA6 (Nylon 6) | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 75–85 | MPa |
| elongation | 15–35 | 30–100 | % |
| e_modulus | 2200–2600 | 2.7–3 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PA6 (Nylon 6) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PA6 (Nylon 6)?
ASA (Acrylonitrile-Styrene-Acrylate) and PA6 (Nylon 6) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PA6 (Nylon 6)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PA6 (Nylon 6)?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PA6 (Nylon 6) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.