ASA (Acrylonitrile-Styrene-Acrylate) vs PE-LD (Low-Density Polyethylene): 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PE-LD (Low-Density Polyethylene)
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PE-LD (Low-Density Polyethylene)
Low-density polyethylene — branched chain structure gives flexibility, transparency, and easy processing. THE film/packaging polymer: cling wrap, carrier bags, squeeze bottles, shrink wrap. Also used for cable insulation, agricultural film, and coatings. Lower density (0.91-0.93) and strength than PE-HD but much more flexible.
| ASA (Acrylonitrile-Styrene-Acrylate) | PE-LD (Low-Density Polyethylene) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 1872 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PE-LD (Low-Density Polyethylene) | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 8–16 | MPa |
| elongation | 15–35 | 200–600 | % |
| e_modulus | 2200–2600 | 150–350 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PE-LD (Low-Density Polyethylene) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PE-LD (Low-Density Polyethylene)?
ASA (Acrylonitrile-Styrene-Acrylate) and PE-LD (Low-Density Polyethylene) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PE-LD (Low-Density Polyethylene)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PE-LD (Low-Density Polyethylene)?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PE-LD (Low-Density Polyethylene) is a Polymers grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.