ASA (Acrylonitrile-Styrene-Acrylate) vs PEEK CF30: 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PEEK CF30
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PEEK CF30
PEEK with 30% short carbon fiber — the stiffest and strongest injection-moldable thermoplastic compound available. E-Mod ~24 GPa (vs 11 GPa GF30, 4.1 unfilled). UTS ~212 MPa. Electrically conductive (antistatic/EMI shielding). Outstanding wear/friction properties. Trade names: Victrex 450CA30, TECAPEEK CF30 (Ensinger), KetaSpire CF30 (Solvay). Used for semiconductor wafer handling, bearing cages, compressor components, and metal-replacement structural parts.
| ASA (Acrylonitrile-Styrene-Acrylate) | PEEK CF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 527-1 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PEEK CF30 | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 205–220 | MPa |
| elongation | 15–35 | 1.5–2.5 | % |
| e_modulus | 2200–2600 | 22000–26000 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PEEK CF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PEEK CF30?
ASA (Acrylonitrile-Styrene-Acrylate) and PEEK CF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PEEK CF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PEEK CF30?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PEEK CF30 is a Polymers grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.