ASA (Acrylonitrile-Styrene-Acrylate) vs PEEK GF30: 0% composition overlap. Significantly different materials serving different application areas.
ASA (Acrylonitrile-Styrene-Acrylate) vs PEEK GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
ASA (Acrylonitrile-Styrene-Acrylate)
UV-resistant alternative to ABS — acrylic rubber replaces butadiene for excellent weatherability. Retains color and gloss outdoors for years without coating. Similar mechanical properties to ABS but with 10× better UV resistance. Trade names: Luran S (BASF/INEOS), Geloy (SABIC). Used for automotive exterior trim, outdoor electrical housings, garden furniture, and building cladding.
PEEK GF30
PEEK with 30% short glass fiber reinforcement. Dramatically increased stiffness (E-Mod 11 GPa vs 4.1 unfilled) and strength (UTS 160 vs 100 MPa) with reduced elongation and creep. Maintains PEEK's chemical resistance and high-temp capability (continuous 250°C). Trade names: Victrex 450GL30, TECAPEEK GF30 (Ensinger), KetaSpire GF30 (Solvay). Used for structural brackets, pump housings, valve seats, bearing cages, and semiconductor wafer handling where higher stiffness than unfilled PEEK is needed.
| ASA (Acrylonitrile-Styrene-Acrylate) | PEEK GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 6402 | ISO 527-1 |
Mechanical properties
| Property | ASA (Acrylonitrile-Styrene-Acrylate) | PEEK GF30 | Unit |
|---|---|---|---|
| tensile_strength | 40–55 | 155–165 | MPa |
| elongation | 15–35 | 2–3 | % |
| e_modulus | 2200–2600 | 10500–11500 | MPa |
Compatibility Assessment
ASA (Acrylonitrile-Styrene-Acrylate) and PEEK GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASA (Acrylonitrile-Styrene-Acrylate) the same as PEEK GF30?
ASA (Acrylonitrile-Styrene-Acrylate) and PEEK GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ASA (Acrylonitrile-Styrene-Acrylate) with PEEK GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASA (Acrylonitrile-Styrene-Acrylate) and PEEK GF30?
The main differences are in the following elements: overall alloying content. ASA (Acrylonitrile-Styrene-Acrylate) is a Polymers grade, while PEEK GF30 is a Polymers grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.