ASP 2030 (PM High Speed Steel) vs H11 / X38CrMoV5-1: 5% composition overlap. Significantly different materials serving different application areas.
ASP 2030 (PM High Speed Steel) vs H11 / X38CrMoV5-1
Side-by-side chemical composition and mechanical property comparison.
Overview
ASP 2030 (PM High Speed Steel)
Powder metallurgy high speed steel by Erasteel (now Zapp). Co-free PM-HSS with excellent combination of wear resistance and toughness. C 1.28%, Cr 4.2%, Mo 5.0%, W 6.4%, V 3.1%. Hardness 64–67 HRC. Superior carbide distribution vs conventional HSS. Applications: end mills, drills, taps, broaches, cold forging punches, fine blanking tools. Alternative to M42 and S390.
H11 / X38CrMoV5-1
1.2343
Cr-Mo-V hot-work tool steel — close relative of H13 with slightly lower C and V. Good hot hardness, thermal fatigue resistance and toughness. Used for forging dies, extrusion tooling, mandrels, and die-casting tools. Often preferred over H13 where higher toughness is needed.
| ASP 2030 (PM High Speed Steel) | H11 / X38CrMoV5-1 | |
|---|---|---|
| Material Number | — | 1.2343 |
| Category | Tool Steel | Tool Steel |
| Standard | Erasteel | EN ISO 4957 |
Chemical composition (wt%) — Pro
| Element | ASP 2030 (PM High Speed Steel) | H11 / X38CrMoV5-1 | Overlap |
|---|---|---|---|
| C | 1.25–1.32% | 0.33–0.41% | No overlap |
| Si | ≤ 0.5% | 0.8–1.2% | No overlap |
| Mn | ≤ 0.4% | 0.25–0.5% | Partial |
| Cr | 4–4.5% | 4.8–5.5% | No overlap |
| Mo | |||
| V | |||
| W |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | ASP 2030 (PM High Speed Steel) | H11 / X38CrMoV5-1 | Unit |
|---|---|---|---|
| hardness_brinell | ≤ 280 | — | HB |
| hardness_rockwell | 64–67 | — | HRC |
| Density | ≥ 8 | ≥ 7.8 | g/cm3 |
| Hardness HRC | |||
| Hardness HB | |||
| Elastic Modulus |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
ASP 2030 (PM High Speed Steel) and H11 / X38CrMoV5-1 have significantly different compositions (5% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ASP 2030 (PM High Speed Steel) the same as H11 / X38CrMoV5-1?
ASP 2030 (PM High Speed Steel) and H11 / X38CrMoV5-1 have a 5% composition overlap. They are generally not directly interchangeable.
Can I replace ASP 2030 (PM High Speed Steel) with H11 / X38CrMoV5-1?
Generally not recommended. The compositions differ significantly (5% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ASP 2030 (PM High Speed Steel) and H11 / X38CrMoV5-1?
The main differences are in the following elements: C, Si, Mn, Cr. ASP 2030 (PM High Speed Steel) is a Tool Steel grade, while H11 / X38CrMoV5-1 is a Tool Steel grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.