C35 vs P235GH: 41% composition overlap. Significantly different materials serving different application areas.
C35 vs P235GH
Side-by-side chemical composition and mechanical property comparison.
Overview
C35
1.0501
Medium-carbon unalloyed steel with moderate strength. Good machinability and weldability. Used for lightly stressed components like levers, axles, bolts, and general machine parts.
P235GH
1.0345
Lowest-strength pressure vessel steel — ReH >=235 MPa. Excellent weldability due to very low C (max 0.16%). THE entry-level boiler/pressure vessel plate in EN 10028-2. Used for low-pressure vessels, boiler drums, heat exchangers, and steam piping at modest pressures and temperatures to ~400°C.
| C35 | P235GH | |
|---|---|---|
| Material Number | 1.0501 | 1.0345 |
| Category | Carbon Steel | Carbon Steel |
| Standard | EN 10083-2 | EN 10028-2 |
Chemical composition (wt%)
| Element | C35 | P235GH | Overlap |
|---|---|---|---|
| C | 0.32–0.39% | 0–0.16% | No overlap |
| Si | 0–0.4% | 0–0.35% | OK |
| Mn | 0.5–0.8% | 0–1.2% | OK |
| P | 0–0.03% | 0–0.025% | OK |
Mechanical properties
| Property | C35 | P235GH | Unit |
|---|---|---|---|
| tensile_strength | 550–700 | 360–480 | MPa |
| yield_strength | ≥ 300 | ≥ 235 | MPa |
| elongation | ≥ 18 | ≥ 25 | % |
Compatibility Assessment
C35 and P235GH have significantly different compositions (41% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is C35 the same as P235GH?
C35 and P235GH have a 41% composition overlap. They are generally not directly interchangeable.
Can I replace C35 with P235GH?
Generally not recommended. The compositions differ significantly (41% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between C35 and P235GH?
The main differences are in the following elements: C. C35 is a Carbon Steel grade, while P235GH is a Carbon Steel grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.