C35 vs S275JR: 49% composition overlap. Significantly different materials serving different application areas.
C35 vs S275JR
Side-by-side chemical composition and mechanical property comparison.
Overview
C35
1.0501
Medium-carbon unalloyed steel with moderate strength. Good machinability and weldability. Used for lightly stressed components like levers, axles, bolts, and general machine parts.
S275JR
1.0044
Medium-strength structural steel with minimum yield strength of 275 MPa. Bridges the gap between S235JR and S355JR. Used for general structural applications, lattice towers, masts, and light crane components. Impact tested at +20°C (JR).
| C35 | S275JR | |
|---|---|---|
| Material Number | 1.0501 | 1.0044 |
| Category | Carbon Steel | Carbon Steel |
| Standard | EN 10083-2 | EN 10025-2 |
Chemical composition (wt%)
| Element | C35 | S275JR | Overlap |
|---|---|---|---|
| C | 0.32–0.39% | 0–0.21% | No overlap |
| Si | 0–0.4% | 0–0.6% | OK |
| Mn | 0.5–0.8% | 0–1.5% | OK |
| P | 0–0.03% | 0–0.035% | OK |
Mechanical properties
| Property | C35 | S275JR | Unit |
|---|---|---|---|
| tensile_strength | 550–700 | 410–560 | MPa |
| yield_strength | ≥ 300 | ≥ 275 | MPa |
| elongation | ≥ 18 | ≥ 23 | % |
Compatibility Assessment
C35 and S275JR have significantly different compositions (49% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is C35 the same as S275JR?
C35 and S275JR have a 49% composition overlap. They are generally not directly interchangeable.
Can I replace C35 with S275JR?
Generally not recommended. The compositions differ significantly (49% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between C35 and S275JR?
The main differences are in the following elements: C. C35 is a Carbon Steel grade, while S275JR is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.