Cu-DHP vs CuZn36Pb3: 0% composition overlap. Significantly different materials serving different application areas.
Cu-DHP vs CuZn36Pb3
Side-by-side chemical composition and mechanical property comparison.
Overview
Cu-DHP
CW024A
Phosphorus-deoxidized copper (DHP = Deoxidized High Phosphorus, 0.015-0.040% P). THE material for copper plumbing tubes worldwide (EN 1057). P prevents hydrogen embrittlement during brazing/welding — essential for plumbing/HVAC joints. Slightly lower electrical conductivity than Cu-ETP (85% IACS vs 101%) due to P content. UNS C12200. Used for plumbing tubes, heating systems, solar thermal, refrigeration tubes, and architectural roofing.
CuZn36Pb3
CW603N
Free-cutting leaded brass — the benchmark for non-ferrous machinability (rated 100%). Lead particles act as chip breakers for excellent surface finish. Used for screw machine parts, fittings, valves, watch components, precision mechanics, and electrical connectors. Old DIN number 2.0375.
| Cu-DHP | CuZn36Pb3 | |
|---|---|---|
| Material Number | CW024A | CW603N |
| Category | Copper & Brass | Copper & Brass |
| Standard | EN 1652 | EN 12164 |
Chemical composition (wt%)
| Element | Cu-DHP | CuZn36Pb3 | Overlap |
|---|---|---|---|
| P | 0.015–0.04% | — | — |
| Ni | — | 0–0.3% | — |
| Cu | ≥ 99.9% | 60–63% | No overlap |
| Al | — | 0–0.05% | — |
Mechanical properties
| Property | Cu-DHP | CuZn36Pb3 | Unit |
|---|---|---|---|
| tensile_strength | 200–260 | ≥ 340 | MPa |
| yield_strength | 40–80 | ≥ 280 | MPa |
| elongation | 40–50 | ≥ 10 | % |
Compatibility Assessment
Cu-DHP and CuZn36Pb3 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is Cu-DHP the same as CuZn36Pb3?
Cu-DHP and CuZn36Pb3 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace Cu-DHP with CuZn36Pb3?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between Cu-DHP and CuZn36Pb3?
The main differences are in the following elements: Cu. Cu-DHP is a Copper & Brass grade, while CuZn36Pb3 is a Copper & Brass grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.