Cu-DHP vs CuZn39Pb3: 0% composition overlap. Significantly different materials serving different application areas.
Cu-DHP vs CuZn39Pb3
Side-by-side chemical composition and mechanical property comparison.
Overview
Cu-DHP
CW024A
Phosphorus-deoxidized copper (DHP = Deoxidized High Phosphorus, 0.015-0.040% P). THE material for copper plumbing tubes worldwide (EN 1057). P prevents hydrogen embrittlement during brazing/welding — essential for plumbing/HVAC joints. Slightly lower electrical conductivity than Cu-ETP (85% IACS vs 101%) due to P content. UNS C12200. Used for plumbing tubes, heating systems, solar thermal, refrigeration tubes, and architectural roofing.
CuZn39Pb3
2.0401
The most widely used free-cutting brass (machinability index 100%). Excellent for high-speed automatic lathe work. Used for turned parts, faucets, valves, fittings, screws, nuts, electrical connectors, and watch components. Also known as MS58.
| Cu-DHP | CuZn39Pb3 | |
|---|---|---|
| Material Number | CW024A | 2.0401 |
| Category | Copper & Brass | Copper & Brass |
| Standard | EN 1652 | EN 12164 |
Chemical composition (wt%)
| Element | Cu-DHP | CuZn39Pb3 | Overlap |
|---|---|---|---|
| P | 0.015–0.04% | — | — |
| Ni | — | 0–0.3% | — |
| Cu | ≥ 99.9% | 57–59% | No overlap |
| Al | — | 0–0.05% | — |
Mechanical properties
| Property | Cu-DHP | CuZn39Pb3 | Unit |
|---|---|---|---|
| tensile_strength | 200–260 | ≥ 360 | MPa |
| yield_strength | 40–80 | ≥ 150 | MPa |
| elongation | 40–50 | ≥ 15 | % |
Compatibility Assessment
Cu-DHP and CuZn39Pb3 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is Cu-DHP the same as CuZn39Pb3?
Cu-DHP and CuZn39Pb3 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace Cu-DHP with CuZn39Pb3?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between Cu-DHP and CuZn39Pb3?
The main differences are in the following elements: Cu. Cu-DHP is a Copper & Brass grade, while CuZn39Pb3 is a Copper & Brass grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.