E6013 vs ER316L: 42% composition overlap. Significantly different materials serving different application areas.
E6013 vs ER316L
Side-by-side chemical composition and mechanical property comparison.
Overview
E6013
Rutile-coated all-position SMAW electrode for AC and DC±. Smooth, stable arc with low spatter and easy slag removal — the most beginner-friendly stick electrode. Tensile strength 60 ksi (414 MPa). Medium penetration. Excellent for sheet metal, thin-wall tubing, general light fabrication and maintenance welding. Not suitable for critical structural or pressure vessel applications. Rebake at 70–100°C for 1h if damp.
ER316L
Low-carbon molybdenum-bearing austenitic stainless steel welding wire — the standard filler for joining 316 and 316L stainless steels. 2-3% Mo provides superior pitting and crevice corrosion resistance versus ER308L, especially in chloride environments. Low carbon (≤0.03%) prevents sensitization. Used for TIG and MIG welding of chemical processing equipment, marine hardware, pharmaceutical vessels, pulp & paper digesters, and offshore piping. Also used for dissimilar joints between 304 and 316 grades.
| E6013 | ER316L | |
|---|---|---|
| Material Number | — | — |
| Category | Welding | Welding |
| Standard | AWS A5.1 | AWS A5.9 |
Chemical composition (wt%)
| Element | E6013 | ER316L | Overlap |
|---|---|---|---|
| C | ≤ 0.12% | ≤ 0.03% | OK |
| Si | ≤ 0.4% | 0.3–0.65% | Partial |
| Mn | ≤ 0.6% | 1–2.5% | No overlap |
| P | ≤ 0.035% | ≤ 0.03% | OK |
Mechanical properties
| Property | E6013 | ER316L | Unit |
|---|---|---|---|
| Tensile Strength | ≥ 414 | — | MPa |
| Yield Strength | ≥ 331 | — | MPa |
| Elongation | ≥ 17 | — | % |
Compatibility Assessment
E6013 and ER316L have significantly different compositions (42% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is E6013 the same as ER316L?
E6013 and ER316L have a 42% composition overlap. They are generally not directly interchangeable.
Can I replace E6013 with ER316L?
Generally not recommended. The compositions differ significantly (42% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between E6013 and ER316L?
The main differences are in the following elements: Si, Mn. E6013 is a Welding grade, while ER316L is a Welding grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.