EPDM (Ethylene Propylene Diene Rubber) vs PEEK CF30: 0% composition overlap. Significantly different materials serving different application areas.
EPDM (Ethylene Propylene Diene Rubber) vs PEEK CF30
Side-by-side chemical composition and mechanical property comparison.
Overview
EPDM (Ethylene Propylene Diene Rubber)
Ethylene propylene diene monomer rubber — THE outdoor/weather elastomer. Saturated backbone gives outstanding ozone, UV, and weathering resistance. Excellent resistance to steam, hot water, and polar solvents. NOT resistant to oils/fuels (opposite of NBR). Good electrical insulation. ρ 0.85-1.3 (lightest common rubber). Used for automotive door/window seals, roofing membranes, radiator hoses, HVAC gaskets, and pond liners.
PEEK CF30
PEEK with 30% short carbon fiber — the stiffest and strongest injection-moldable thermoplastic compound available. E-Mod ~24 GPa (vs 11 GPa GF30, 4.1 unfilled). UTS ~212 MPa. Electrically conductive (antistatic/EMI shielding). Outstanding wear/friction properties. Trade names: Victrex 450CA30, TECAPEEK CF30 (Ensinger), KetaSpire CF30 (Solvay). Used for semiconductor wafer handling, bearing cages, compressor components, and metal-replacement structural parts.
| EPDM (Ethylene Propylene Diene Rubber) | PEEK CF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 37 | ISO 527-1 |
Mechanical properties
| Property | EPDM (Ethylene Propylene Diene Rubber) | PEEK CF30 | Unit |
|---|---|---|---|
| tensile_strength | 7–21 | 205–220 | MPa |
| elongation | 100–700 | 1.5–2.5 | % |
| hardness_shore_a | 30–90 | — | Shore A |
Compatibility Assessment
EPDM (Ethylene Propylene Diene Rubber) and PEEK CF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EPDM (Ethylene Propylene Diene Rubber) the same as PEEK CF30?
EPDM (Ethylene Propylene Diene Rubber) and PEEK CF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace EPDM (Ethylene Propylene Diene Rubber) with PEEK CF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between EPDM (Ethylene Propylene Diene Rubber) and PEEK CF30?
The main differences are in the following elements: overall alloying content. EPDM (Ethylene Propylene Diene Rubber) is a Polymers grade, while PEEK CF30 is a Polymers grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.