GFRP / GFK (Glass Fiber Reinforced Epoxy) vs PEEK GF30: 0% composition overlap. Significantly different materials serving different application areas.
GFRP / GFK (Glass Fiber Reinforced Epoxy) vs PEEK GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
GFRP / GFK (Glass Fiber Reinforced Epoxy)
Glass fiber reinforced epoxy composite — the cost-effective structural composite for industrial, marine and construction applications. E-glass fiber in epoxy matrix. Unidirectional: UTS ~1000 MPa, E ~40 GPa. Quasi-isotropic layup: UTS ~300 MPa, E ~18 GPa. Density 1.8–2.1 g/cm³. Electrically insulating (unlike CFRP). Used for boat hulls, wind turbine blades, chemical tanks/pipes, architectural panels, ladders, gratings, automotive body panels and electrical insulation structures.
PEEK GF30
PEEK with 30% short glass fiber reinforcement. Dramatically increased stiffness (E-Mod 11 GPa vs 4.1 unfilled) and strength (UTS 160 vs 100 MPa) with reduced elongation and creep. Maintains PEEK's chemical resistance and high-temp capability (continuous 250°C). Trade names: Victrex 450GL30, TECAPEEK GF30 (Ensinger), KetaSpire GF30 (Solvay). Used for structural brackets, pump housings, valve seats, bearing cages, and semiconductor wafer handling where higher stiffness than unfilled PEEK is needed.
| GFRP / GFK (Glass Fiber Reinforced Epoxy) | PEEK GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ASTM D3039 | ISO 527-1 |
Mechanical properties
| Property | GFRP / GFK (Glass Fiber Reinforced Epoxy) | PEEK GF30 | Unit |
|---|---|---|---|
| Tensile Strength | 900–1100 | — | MPa |
| Tensile Modulus | 38–45 | — | GPa |
| Density | 1.8–2.1 | — | g/cm³ |
Compatibility Assessment
GFRP / GFK (Glass Fiber Reinforced Epoxy) and PEEK GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is GFRP / GFK (Glass Fiber Reinforced Epoxy) the same as PEEK GF30?
GFRP / GFK (Glass Fiber Reinforced Epoxy) and PEEK GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace GFRP / GFK (Glass Fiber Reinforced Epoxy) with PEEK GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between GFRP / GFK (Glass Fiber Reinforced Epoxy) and PEEK GF30?
The main differences are in the following elements: overall alloying content. GFRP / GFK (Glass Fiber Reinforced Epoxy) is a Polymers grade, while PEEK GF30 is a Polymers grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.