GFRP / GFK (Glass Fiber Reinforced Epoxy) vs POM-H (Acetal Homopolymer): 0% composition overlap. Significantly different materials serving different application areas.
GFRP / GFK (Glass Fiber Reinforced Epoxy) vs POM-H (Acetal Homopolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
GFRP / GFK (Glass Fiber Reinforced Epoxy)
Glass fiber reinforced epoxy composite — the cost-effective structural composite for industrial, marine and construction applications. E-glass fiber in epoxy matrix. Unidirectional: UTS ~1000 MPa, E ~40 GPa. Quasi-isotropic layup: UTS ~300 MPa, E ~18 GPa. Density 1.8–2.1 g/cm³. Electrically insulating (unlike CFRP). Used for boat hulls, wind turbine blades, chemical tanks/pipes, architectural panels, ladders, gratings, automotive body panels and electrical insulation structures.
POM-H (Acetal Homopolymer)
Polyoxymethylene Homopolymer — slightly stronger and stiffer than POM-C copolymer but with centerline porosity in stock shapes and lower resistance to hot water/alkalis. Trade names include Delrin (DuPont/DuPont de Nemours) and Tenac (Asahi Kasei). Used for gears, cams, springs, clips, fuel system components, and precision-machined parts where maximum stiffness is needed.
| GFRP / GFK (Glass Fiber Reinforced Epoxy) | POM-H (Acetal Homopolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ASTM D3039 | ISO 10350 |
Mechanical properties
| Property | GFRP / GFK (Glass Fiber Reinforced Epoxy) | POM-H (Acetal Homopolymer) | Unit |
|---|---|---|---|
| Tensile Strength | 900–1100 | — | MPa |
| Tensile Modulus | 38–45 | — | GPa |
| Density | 1.8–2.1 | — | g/cm³ |
Compatibility Assessment
GFRP / GFK (Glass Fiber Reinforced Epoxy) and POM-H (Acetal Homopolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is GFRP / GFK (Glass Fiber Reinforced Epoxy) the same as POM-H (Acetal Homopolymer)?
GFRP / GFK (Glass Fiber Reinforced Epoxy) and POM-H (Acetal Homopolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace GFRP / GFK (Glass Fiber Reinforced Epoxy) with POM-H (Acetal Homopolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between GFRP / GFK (Glass Fiber Reinforced Epoxy) and POM-H (Acetal Homopolymer)?
The main differences are in the following elements: overall alloying content. GFRP / GFK (Glass Fiber Reinforced Epoxy) is a Polymers grade, while POM-H (Acetal Homopolymer) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.