LCP (Liquid Crystal Polymer) vs PA66 (Nylon 66): 0% composition overlap. Significantly different materials serving different application areas.
LCP (Liquid Crystal Polymer) vs PA66 (Nylon 66)
Side-by-side chemical composition and mechanical property comparison.
Overview
LCP (Liquid Crystal Polymer)
Liquid Crystal Polymer — self-reinforcing aromatic polyester with outstanding flow into thin walls (<0.2mm). Extremely low moisture absorption (0.02%), minimal warpage, excellent dimensional stability. Near-zero creep. Inherently flame-retardant (V-0 at 0.2mm). Very high HDT (>270°C). Trade names: Vectra (Celanese), Zenite (DuPont), Siveras (Toray). THE micro-connector and SMT-reflow-compatible polymer. Used for SMD connectors, fiber optic ferrules, chip carriers, sensors, and ultra-thin-wall electronic housings.
PA66 (Nylon 66)
Polyamide 66 — stiffer and more heat-resistant than PA6. Higher crystallinity gives better creep resistance and ~40°C higher melting point (260°C vs 220°C). Slightly more brittle. More moisture-sensitive at saturation than PA6. Trade names include Ultramid A (BASF), Zytel 101 (DuPont), Tecamid 66 (Ensinger). Dominant in US/UK markets. Used for automotive engine components, electrical connectors, gears, cable ties, and industrial bushings.
| LCP (Liquid Crystal Polymer) | PA66 (Nylon 66) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 527-1 | ISO 10350 |
Mechanical properties
| Property | LCP (Liquid Crystal Polymer) | PA66 (Nylon 66) | Unit |
|---|---|---|---|
| tensile_strength | 130–190 | 80–90 | MPa |
| elongation | 2–4 | 15–40 | % |
| e_modulus | 9000–17000 | 3–3.2 | MPa |
Compatibility Assessment
LCP (Liquid Crystal Polymer) and PA66 (Nylon 66) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is LCP (Liquid Crystal Polymer) the same as PA66 (Nylon 66)?
LCP (Liquid Crystal Polymer) and PA66 (Nylon 66) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace LCP (Liquid Crystal Polymer) with PA66 (Nylon 66)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between LCP (Liquid Crystal Polymer) and PA66 (Nylon 66)?
The main differences are in the following elements: overall alloying content. LCP (Liquid Crystal Polymer) is a Polymers grade, while PA66 (Nylon 66) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.