LCP (Liquid Crystal Polymer) vs PMMA (Acrylic): 0% composition overlap. Significantly different materials serving different application areas.
LCP (Liquid Crystal Polymer) vs PMMA (Acrylic)
Side-by-side chemical composition and mechanical property comparison.
Overview
LCP (Liquid Crystal Polymer)
Liquid Crystal Polymer — self-reinforcing aromatic polyester with outstanding flow into thin walls (<0.2mm). Extremely low moisture absorption (0.02%), minimal warpage, excellent dimensional stability. Near-zero creep. Inherently flame-retardant (V-0 at 0.2mm). Very high HDT (>270°C). Trade names: Vectra (Celanese), Zenite (DuPont), Siveras (Toray). THE micro-connector and SMT-reflow-compatible polymer. Used for SMD connectors, fiber optic ferrules, chip carriers, sensors, and ultra-thin-wall electronic housings.
PMMA (Acrylic)
Polymethylmethacrylate — the optical-quality plastic. 92% light transmission (better than glass). Excellent weathering resistance and UV stability. Hard but brittle (no yielding — fractures). Trade names include Plexiglas (Röhm/Evonik), Perspex (Lucite), Acrylite (Mitsubishi). Used for signs, displays, light guides, automotive tail lamps, aquariums, skylights, and protective shields.
| LCP (Liquid Crystal Polymer) | PMMA (Acrylic) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 527-1 | ISO 10350 |
Mechanical properties
| Property | LCP (Liquid Crystal Polymer) | PMMA (Acrylic) | Unit |
|---|---|---|---|
| tensile_strength | 130–190 | 50–75 | MPa |
| elongation | 2–4 | 2–6 | % |
| e_modulus | 9000–17000 | 2.7–3.2 | MPa |
Compatibility Assessment
LCP (Liquid Crystal Polymer) and PMMA (Acrylic) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is LCP (Liquid Crystal Polymer) the same as PMMA (Acrylic)?
LCP (Liquid Crystal Polymer) and PMMA (Acrylic) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace LCP (Liquid Crystal Polymer) with PMMA (Acrylic)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between LCP (Liquid Crystal Polymer) and PMMA (Acrylic)?
The main differences are in the following elements: overall alloying content. LCP (Liquid Crystal Polymer) is a Polymers grade, while PMMA (Acrylic) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.