LCP (Liquid Crystal Polymer) vs PP GF30: 0% composition overlap. Significantly different materials serving different application areas.
LCP (Liquid Crystal Polymer) vs PP GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
LCP (Liquid Crystal Polymer)
Liquid Crystal Polymer — self-reinforcing aromatic polyester with outstanding flow into thin walls (<0.2mm). Extremely low moisture absorption (0.02%), minimal warpage, excellent dimensional stability. Near-zero creep. Inherently flame-retardant (V-0 at 0.2mm). Very high HDT (>270°C). Trade names: Vectra (Celanese), Zenite (DuPont), Siveras (Toray). THE micro-connector and SMT-reflow-compatible polymer. Used for SMD connectors, fiber optic ferrules, chip carriers, sensors, and ultra-thin-wall electronic housings.
PP GF30
Polypropylene with 30% short glass fiber — a cost-effective alternative to PA GF30 for applications up to ~130°C. Much cheaper base resin (PP vs PA), zero moisture sensitivity, and excellent chemical resistance. Lower strength than PA6 GF30 (UTS 80 vs 175 MPa) but sufficient for many structural parts. Trade names include Celstran PP-GF30 (Celanese), Tepex (LANXESS), Stamax (SABIC). Used for automotive front-end carriers, battery trays, HVAC components, and household appliance frames.
| LCP (Liquid Crystal Polymer) | PP GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 527-1 | ISO 10350 |
Mechanical properties
| Property | LCP (Liquid Crystal Polymer) | PP GF30 | Unit |
|---|---|---|---|
| tensile_strength | 130–190 | 70–90 | MPa |
| elongation | 2–4 | 3–5 | % |
| e_modulus | 9000–17000 | 5.5–7.5 | MPa |
Compatibility Assessment
LCP (Liquid Crystal Polymer) and PP GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is LCP (Liquid Crystal Polymer) the same as PP GF30?
LCP (Liquid Crystal Polymer) and PP GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace LCP (Liquid Crystal Polymer) with PP GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between LCP (Liquid Crystal Polymer) and PP GF30?
The main differences are in the following elements: overall alloying content. LCP (Liquid Crystal Polymer) is a Polymers grade, while PP GF30 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.