LCP (Liquid Crystal Polymer) vs PPS GF40: 0% composition overlap. Significantly different materials serving different application areas.
LCP (Liquid Crystal Polymer) vs PPS GF40
Side-by-side chemical composition and mechanical property comparison.
Overview
LCP (Liquid Crystal Polymer)
Liquid Crystal Polymer — self-reinforcing aromatic polyester with outstanding flow into thin walls (<0.2mm). Extremely low moisture absorption (0.02%), minimal warpage, excellent dimensional stability. Near-zero creep. Inherently flame-retardant (V-0 at 0.2mm). Very high HDT (>270°C). Trade names: Vectra (Celanese), Zenite (DuPont), Siveras (Toray). THE micro-connector and SMT-reflow-compatible polymer. Used for SMD connectors, fiber optic ferrules, chip carriers, sensors, and ultra-thin-wall electronic housings.
PPS GF40
Polyphenylene Sulfide with 40% glass fiber — the ultimate under-hood engineering plastic. Service to 240°C continuous, inherently V-0 flame resistant without additives, near-zero moisture absorption (<0.02%), exceptional chemical resistance (comparable to PEEK/fluoropolymers). Trade names include Ryton R-4 (Solvay), Fortron 1140L4 (Celanese), Tedur (INEOS), TECATRON GF40 (Ensinger). Used for automotive water pump impellers, thermostat housings, EGR valves, LED reflectors, and semiconductor wafer carriers.
| LCP (Liquid Crystal Polymer) | PPS GF40 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 527-1 | ISO 10350 |
Mechanical properties
| Property | LCP (Liquid Crystal Polymer) | PPS GF40 | Unit |
|---|---|---|---|
| tensile_strength | 130–190 | 150–185 | MPa |
| elongation | 2–4 | 1–2 | % |
| e_modulus | 9000–17000 | 13–15 | MPa |
Compatibility Assessment
LCP (Liquid Crystal Polymer) and PPS GF40 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is LCP (Liquid Crystal Polymer) the same as PPS GF40?
LCP (Liquid Crystal Polymer) and PPS GF40 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace LCP (Liquid Crystal Polymer) with PPS GF40?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between LCP (Liquid Crystal Polymer) and PPS GF40?
The main differences are in the following elements: overall alloying content. LCP (Liquid Crystal Polymer) is a Polymers grade, while PPS GF40 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.