NBR (Nitrile Rubber) vs PEEK CF30: 0% composition overlap. Significantly different materials serving different application areas.
NBR (Nitrile Rubber) vs PEEK CF30
Side-by-side chemical composition and mechanical property comparison.
Overview
NBR (Nitrile Rubber)
Nitrile butadiene rubber (Buna-N) — THE oil and fuel resistant elastomer. ACN content (18-50%) determines the oil resistance vs low-temp flexibility tradeoff. Higher ACN = better oil resistance but stiffer at low temp. The most widely used seal material worldwide. Used for O-rings, fuel hoses, gaskets, hydraulic seals, oil seals, and nitrile gloves. Not suitable for ozone, UV, or polar solvents (ketones, esters). HNBR variant for higher heat resistance.
PEEK CF30
PEEK with 30% short carbon fiber — the stiffest and strongest injection-moldable thermoplastic compound available. E-Mod ~24 GPa (vs 11 GPa GF30, 4.1 unfilled). UTS ~212 MPa. Electrically conductive (antistatic/EMI shielding). Outstanding wear/friction properties. Trade names: Victrex 450CA30, TECAPEEK CF30 (Ensinger), KetaSpire CF30 (Solvay). Used for semiconductor wafer handling, bearing cages, compressor components, and metal-replacement structural parts.
| NBR (Nitrile Rubber) | PEEK CF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 37 | ISO 527-1 |
Mechanical properties
| Property | NBR (Nitrile Rubber) | PEEK CF30 | Unit |
|---|---|---|---|
| tensile_strength | 7–24 | 205–220 | MPa |
| elongation | 200–600 | 1.5–2.5 | % |
| hardness_shore_a | 40–90 | — | Shore A |
Compatibility Assessment
NBR (Nitrile Rubber) and PEEK CF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is NBR (Nitrile Rubber) the same as PEEK CF30?
NBR (Nitrile Rubber) and PEEK CF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace NBR (Nitrile Rubber) with PEEK CF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between NBR (Nitrile Rubber) and PEEK CF30?
The main differences are in the following elements: overall alloying content. NBR (Nitrile Rubber) is a Polymers grade, while PEEK CF30 is a Polymers grade.
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.