P460NH vs S355J0: 73% composition overlap. Some similarities but notable differences in alloying elements.
P460NH vs S355J0
Side-by-side chemical composition and mechanical property comparison.
Overview
P460NH
1.8935
Highest-strength normalized pressure vessel fine-grain steel — ReH >=460 MPa. "N" = normalized, "H" = elevated temperature. Used for high-pressure vessels, boiler drums, and chemical reactors where maximum strength with guaranteed elevated-temperature properties is needed. EN 10028-3 + PED compliant. Good weldability due to fine grain and controlled CEV.
S355J0
1.0553
Non-alloy structural steel with 355 MPa min yield and 27J impact at 0°C. The "J0" variant between JR (+20°C) and J2 (-20°C). Former designation St52-3U (DIN 17100). Good weldability (CEV ≤0.47). Used for bridges, cranes, buildings, wind turbines, heavy machinery frames, and general structural applications requiring moderate low-temperature toughness.
| P460NH | S355J0 | |
|---|---|---|
| Material Number | 1.8935 | 1.0553 |
| Category | Carbon Steel | Carbon Steel |
| Standard | EN 10028-3 | EN 10025-2 |
Chemical composition (wt%) — Pro
| Element | P460NH | S355J0 | Overlap |
|---|---|---|---|
| C | 0–0.2% | 0–0.22% | OK |
| Si | 0–0.6% | 0–0.55% | OK |
| Mn | 1–1.7% | 0–1.6% | Partial |
| P | — | 0–0.035% | — |
| S | |||
| V | |||
| Cu | |||
| Al | |||
| Nb | |||
| N |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | P460NH | S355J0 | Unit |
|---|---|---|---|
| Tensile Strength | 560–730 | 470–630 | MPa |
| Yield Strength | ≥ 460 | ≥ 355 | MPa |
| Elongation | ≥ 17 | ≥ 22 | % |
| Elastic Modulus | |||
| Density |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
P460NH and S355J0 share some characteristics (73% overlap) but have notable differences. They may be substitutable in some applications but not all. Verify suitability carefully.
Automated assessment based on composition analysis
Frequently Asked Questions
Is P460NH the same as S355J0?
P460NH and S355J0 have a 73% composition overlap. For most purposes, they can be considered similar.
Can I replace P460NH with S355J0?
In many cases, yes. The compositions overlap significantly (73%). However, always verify mechanical property requirements and heat treatment compatibility for your specific application.
What is the difference between P460NH and S355J0?
The main differences are in the following elements: Mn. P460NH is a Carbon Steel grade, while S355J0 is a Carbon Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.