PA12 (Nylon 12) vs PE-UHMW: 0% composition overlap. Significantly different materials serving different application areas.
PA12 (Nylon 12) vs PE-UHMW
Side-by-side chemical composition and mechanical property comparison.
Overview
PA12 (Nylon 12)
Polyamide 12 — the long-chain polyamide with the lowest moisture absorption of all PA grades (0.1-0.15% vs PA6: 1.5%). Excellent dimensional stability in humid environments. Best chemical resistance among polyamides (oils, fuels, hydraulic fluids). Lowest density of all PA (1.01 g/cm³). Also the dominant 3D printing (SLS/MJF) material. Trade names include Rilsamid (Arkema), Grilamid L (EMS), TECAMID 12 (Ensinger), Vestamid L (Evonik). Used for fuel lines, brake lines, pneumatic tubing, cable sheathing, and 3D-printed functional parts.
PE-UHMW
Ultra-High Molecular Weight Polyethylene — the highest impact-strength thermoplastic. Molecular weight 2-6 million g/mol. Self-lubricating, extremely wear-resistant (15x better than carbon steel), and chemically inert. Used for hip/knee implant bearings, conveyor guides, dock fenders, chute liners, food processing equipment, and ballistic armor (Dyneema/Spectra fiber form).
| PA12 (Nylon 12) | PE-UHMW | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 10350 | ISO 11542 |
Mechanical properties
| Property | PA12 (Nylon 12) | PE-UHMW | Unit |
|---|---|---|---|
| tensile_strength | 45–60 | 39–48 | MPa |
| yield_strength | 40–50 | 19–23 | MPa |
| elongation | 100–300 | 250–450 | % |
Compatibility Assessment
PA12 (Nylon 12) and PE-UHMW have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is PA12 (Nylon 12) the same as PE-UHMW?
PA12 (Nylon 12) and PE-UHMW have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace PA12 (Nylon 12) with PE-UHMW?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between PA12 (Nylon 12) and PE-UHMW?
The main differences are in the following elements: overall alloying content. PA12 (Nylon 12) is a Polymers grade, while PE-UHMW is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.