Ti-6Al-2Sn-4Zr-2Mo vs Titanium Grade 2 (CP): 81% composition overlap. Some similarities but notable differences in alloying elements.
Ti-6Al-2Sn-4Zr-2Mo vs Titanium Grade 2 (CP)
Side-by-side chemical composition and mechanical property comparison.
Overview
Ti-6Al-2Sn-4Zr-2Mo
Near-alpha high-temperature titanium alloy. Better creep resistance than Ti-6Al-4V at temperatures above 400°C — usable to 550°C continuous. Sn and Zr are alpha-stabilizers providing solid-solution strengthening without eutectoid decomposition. THE jet engine compressor disc alloy (stages 2-7 typically). Also used for afterburner structures, blisks, and gas turbine components. Si addition (0.06-0.10%) further improves creep.
Titanium Grade 2 (CP)
3.7035
The workhorse commercially pure titanium grade. Best balance of strength, ductility, and corrosion resistance among CP grades. Excellent resistance to seawater, chlorides, and oxidizing acids. Used for heat exchangers, chemical processing, marine hardware, desalination, and medical implants.
| Ti-6Al-2Sn-4Zr-2Mo | Titanium Grade 2 (CP) | |
|---|---|---|
| Material Number | — | 3.7035 |
| Category | Titanium | Titanium |
| Standard | ASTM B381 | ASTM B265 |
Chemical composition (wt%) — Pro
| Element | Ti-6Al-2Sn-4Zr-2Mo | Titanium Grade 2 (CP) | Overlap |
|---|---|---|---|
| C | — | 0–0.08% | — |
| Si | 0.06–0.1% | — | — |
| Mo | 1.8–2.2% | — | — |
| Al | 5.5–6.5% | — | — |
| Ti | |||
| N | |||
| Sn | |||
| Zr | |||
| Fe | |||
| O | |||
| H |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | Ti-6Al-2Sn-4Zr-2Mo | Titanium Grade 2 (CP) | Unit |
|---|---|---|---|
| Tensile Strength | 900–1000 | ≥ 345 | MPa |
| Yield Strength | 830–900 | ≥ 275 | MPa |
| Elongation | 10–15 | ≥ 20 | % |
| Elastic Modulus | |||
| Density | |||
| Tensile Strength | |||
| Yield Strength Rp0.2 | |||
| Elongation A | |||
| Density | |||
| Melting Point | |||
| Elastic Modulus |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
Ti-6Al-2Sn-4Zr-2Mo and Titanium Grade 2 (CP) share some characteristics (81% overlap) but have notable differences. They may be substitutable in some applications but not all. Verify suitability carefully.
Automated assessment based on composition analysis
Frequently Asked Questions
Is Ti-6Al-2Sn-4Zr-2Mo the same as Titanium Grade 2 (CP)?
Ti-6Al-2Sn-4Zr-2Mo and Titanium Grade 2 (CP) have a 81% composition overlap. For most purposes, they can be considered similar.
Can I replace Ti-6Al-2Sn-4Zr-2Mo with Titanium Grade 2 (CP)?
In many cases, yes. The compositions overlap significantly (81%). However, always verify mechanical property requirements and heat treatment compatibility for your specific application.
What is the difference between Ti-6Al-2Sn-4Zr-2Mo and Titanium Grade 2 (CP)?
The main differences are in the following elements: overall alloying content. Ti-6Al-2Sn-4Zr-2Mo is a Titanium grade, while Titanium Grade 2 (CP) is a Titanium grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.