Ti-6Al-2Sn-4Zr-6Mo vs Ti-6Al-4V (Grade 5): 76% composition overlap. Some similarities but notable differences in alloying elements.
Ti-6Al-2Sn-4Zr-6Mo vs Ti-6Al-4V (Grade 5)
Side-by-side chemical composition and mechanical property comparison.
Overview
Ti-6Al-2Sn-4Zr-6Mo
Beta-rich alpha-beta titanium alloy — higher Mo (6%) than Ti-6242 for significantly higher strength (UTS 1100+ STA). Forged beta then STA (Solution Treat + Age) for peak properties. Used for high-compressor discs and blades in jet engines where strength at 300-450°C is critical. More Beta phase than 6242 = higher strength but lower creep resistance. AMS 4981.
Ti-6Al-4V (Grade 5)
3.7164
The most widely used titanium alloy — accounts for ~50% of all titanium production. Alpha-beta alloy with exceptional strength-to-weight ratio. Used for jet engine components, airframe structures, medical implants (hip/knee), fasteners, and racing components. Biocompatible.
| Ti-6Al-2Sn-4Zr-6Mo | Ti-6Al-4V (Grade 5) | |
|---|---|---|
| Material Number | — | 3.7164 |
| Category | Titanium | Titanium |
| Standard | AMS 4981 | ASTM B265 |
Chemical composition (wt%)
| Element | Ti-6Al-2Sn-4Zr-6Mo | Ti-6Al-4V (Grade 5) | Overlap |
|---|---|---|---|
| C | — | 0–0.08% | — |
| Mo | 5.5–6.5% | — | — |
| V | — | 3.5–4.5% | — |
| Al | 5.5–6.5% | 5.5–6.75% | OK |
Mechanical properties
| Property | Ti-6Al-2Sn-4Zr-6Mo | Ti-6Al-4V (Grade 5) | Unit |
|---|---|---|---|
| tensile_strength | 1100–1250 | ≥ 895 | MPa |
| yield_strength | 1000–1150 | ≥ 828 | MPa |
| elongation | 8–12 | ≥ 10 | % |
Compatibility Assessment
Ti-6Al-2Sn-4Zr-6Mo and Ti-6Al-4V (Grade 5) share some characteristics (76% overlap) but have notable differences. They may be substitutable in some applications but not all. Verify suitability carefully.
Automated assessment based on composition analysis
Frequently Asked Questions
Is Ti-6Al-2Sn-4Zr-6Mo the same as Ti-6Al-4V (Grade 5)?
Ti-6Al-2Sn-4Zr-6Mo and Ti-6Al-4V (Grade 5) have a 76% composition overlap. For most purposes, they can be considered similar.
Can I replace Ti-6Al-2Sn-4Zr-6Mo with Ti-6Al-4V (Grade 5)?
In many cases, yes. The compositions overlap significantly (76%). However, always verify mechanical property requirements and heat treatment compatibility for your specific application.
What is the difference between Ti-6Al-2Sn-4Zr-6Mo and Ti-6Al-4V (Grade 5)?
The main differences are in the following elements: overall alloying content. Ti-6Al-2Sn-4Zr-6Mo is a Titanium grade, while Ti-6Al-4V (Grade 5) is a Titanium grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.