The Japan equivalent of DC04 (1.0338) is SPCE with a 90% composition match.
🇯🇵 Japan equivalent of
DC041.0338
Standard: JIS · Source: JIS G3141
Japanese deep-drawing cold-rolled
Quick Facts
| Original | 🇯🇵 Equivalent | |
|---|---|---|
| Designation | DC04 | SPCE |
| Material Number | 1.0338 | — |
| Standard | EN 10130 | JIS |
| Category | Carbon Steel | Carbon Steel |
Frequently Asked Questions
Is DC04 the same as SPCE?
DC04 (EN 10130) and SPCE (JIS) are near-equivalent grades with a 90% composition overlap. Both are carbon steel grades. Minor differences may exist in alloying element ranges. For most applications, they are interchangeable. Always verify against the applicable specification for safety-critical components.
Can I substitute DC04 with SPCE?
In most cases, yes. The chemical composition ranges overlap significantly (90%). However, verify mechanical property requirements for your specific application, as heat treatment practices may differ between EN 10130 and JIS standards.
What is the JIS equivalent of DC04?
The JIS equivalent of DC04 (1.0338) is SPCE, specified in JIS G3141.
Other International Equivalents
| Country | Standard | Grade | Match | |
|---|---|---|---|---|
| 🇪🇺 | Europe | EN | DC04 | 100% |
| 🇪🇺 | Europe | DIN | St14 (old) | 98% |
Related Comparisons
Data provided for reference only. Always verify against the applicable specification for critical applications. Source: EN 10130, JIS G3141.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.