Copper grades

Lead-free alpha/alpha+beta brass (63% Cu, 37% Zn). Compromise between cold formability (CuZn35) and hot formability (CuZn40). The most widely used unleaded brass. Used for cartridge cases, radiator cores, lamp components, plumbing fixtures, and decorative hardware.

Free-cutting brass with 2% lead. Good machinability (80% of CuZn39Pb3) with slightly better cold formability. Used for fittings, valves, electrical connectors, and turned parts where slightly less Pb is acceptable or required by regulation. ≈ UNS C37700.

The most widely used free-cutting brass (machinability index 100%). Excellent for high-speed automatic lathe work. Used for turned parts, faucets, valves, fittings, screws, nuts, electrical connectors, and watch components. Also known as MS58.

Muntz Metal / 60-40 Brass — at the alpha-beta boundary, the strongest common unleaded brass. Good hot workability (extrusion, forging, hot stamping). Poor cold formability vs lower-Zn brasses. Susceptible to dezincification in aggressive waters. Used for architectural extrusions, heat exchanger tubes, condenser plates, and marine hardware. ≈ UNS C28000.