EN AW-6262
EN AW-6262Free-machining Al-Mg-Si alloy — Pb + Bi addition for chip-breaking on CNC automatics. Same base as 6061 but optimized for high-speed screw machine production. T9: UTS 390-410 MPa. THE aluminum alloy for automatic screw machine parts: fittings, valve bodies, couplings, camera parts, and any high-volume turned Al component. Machinability rating ~90% of 2011.
International equivalents
| Flag | Standard | Country | Grade | Number | Match |
|---|---|---|---|---|---|
| 🇺🇸 | AA | USA | AA 6262 / UNS A96262 | A96262 | REF |
| 🇪🇺 | EN | Europe | EN AW-6262 / AlMg1SiPb | EN AW-6262 | 100% |
Sources: AA, EN 573-3
Mechanical properties — Pro
T9
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | ||
| Yield Strength | ||
| Elongation | ||
| Elastic Modulus | ||
| Density |
Sign up free and get 5 full lookups immediately.
Sign up free — 5 lookups/day freeRelated materials
EN AW-6082
3.2315High-strength structural aluminium alloy in the Al-Mg-Si family. One of the strongest 6xxx series alloys due to manganese addition. Replaced 6061 in many European applications. Used for trusses, bridges, cranes, transport, scaffolding, and marine applications. Heat treatable (T6/T651).
EN AW-5083
3.3547The highest-strength non-heat-treatable aluminium alloy. Excellent corrosion resistance (especially seawater), good weldability. Standard alloy for shipbuilding, offshore, pressure vessels, cryogenic applications, and armour plate. Not for continuous service above 65°C under stress (SCC risk).
EN AW-2024
3.1355Classic high-strength aerospace aluminium alloy (Al-Cu-Mg). Excellent fatigue resistance — the standard choice for aircraft fuselage skins and wing tension members. Poor corrosion resistance and weldability. Often supplied with Alclad cladding for corrosion protection. In use since 1931.
Not sure which material fits?
🤖 Ask AI Advisor →All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.