P295GH
1.0481Mid-range pressure vessel steel — ReH >=295 MPa. Between P265GH and P355GH. Used for unfired pressure vessels, heat exchangers, and boiler components per EN 10028-2. Good weldability and guaranteed elevated-temperature yield strength. Widely specified in European process plant design.
International equivalents
| Flag | Standard | Country | Grade | Number | Match |
|---|---|---|---|---|---|
| 🇪🇺 | EN | Europe | P295GH / 1.0481 | 1.0481 | 100% |
Sources: EN 10028-2
Chemical composition comparison (wt%)
Side-by-side: P295GH (EN) (EN 10028-2) vs P295GH / 1.0481 (EN) (EN 10028-2)
| Element | P295GH (EN) | P295GH / 1.0481 (EN) | Overlap |
|---|---|---|---|
| C | 0–0.2% | 0–0.2% | OK |
| Si | 0–0.4% | 0–0.4% | OK |
| Mn | 0–1.4% | 0–1.4% | OK |
| P | 0–0.025% | 0–0.025% | OK |
| S | 0–0.015% | 0–0.015% | OK |
Mechanical properties
Normalized
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | 460–580 | MPa |
| Yield Strength | ≥ 295 | MPa |
| Elongation | ≥ 22 | % |
| Elastic Modulus | ≥ 210 | GPa |
| Density | ≥ 7.85 | g/cm3 |
Compatibility verdict
P295GH and P295GH / 1.0481: 100% composition match
Close equivalents but NOT identical.
Related materials
S355JR
1.0045High-strength low-alloy structural steel with minimum yield strength of 355 MPa. Standard grade for bridges, buildings, cranes, and general structural applications. Impact tested at +20°C (JR).
S690QL
1.8928High-strength quenched and tempered fine-grain structural steel with minimum yield strength of 690 MPa. Used for heavily loaded structures like mobile cranes, mining equipment, bridges, and pressure vessels.
S275JR
1.0044Medium-strength structural steel with minimum yield strength of 275 MPa. Bridges the gap between S235JR and S355JR. Used for general structural applications, lattice towers, masts, and light crane components. Impact tested at +20°C (JR).
Not sure which material fits?
🤖 Ask AI Advisor →All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.