X39Cr13
1.4031Martensitic chromium stainless steel with medium-high carbon content (0.36-0.42%) and 12.5-14.5% Cr. Higher hardness potential than X30Cr13 (up to 54 HRC) but slightly reduced toughness. Used for high-quality cutlery, cutting tools, scissors, surgical instruments, and measuring tools requiring both corrosion resistance and good edge retention.
Chemical composition comparison (wt%)
Side-by-side: X39Cr13 (EN) (EN 10088-2) vs ASTM
| Element | X39Cr13 (EN) | ASTM | Overlap |
|---|---|---|---|
| C | 0.36–0.42% | — | — |
| Si | ≤ 1% | — | — |
| Mn | ≤ 1% | — | — |
| P | ≤ 0.04% | — | — |
| S | ≤ 0.015% | — | — |
| Cr | 12.5–14.5% | — | — |
Mechanical properties
QT
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | ≥ 850 | MPa |
| Yield Strength | ≥ 650 | MPa |
| Elongation | ≥ 10 | % |
| Hardness HRC | 50–54 | HRC |
| Density | ≥ 7.7 | g/cm3 |
Heat treatment
| Process | Temperature | Medium | Holding Time | Notes |
|---|---|---|---|---|
| hardening | 1000–1050 °C | oil | — | Air or oil quench |
| tempering | 150–350 °C | air | — | Temper to desired hardness |
| annealing | 760–810 °C | furnace | — | Soft annealing, slow cool |
Related materials
304 Stainless Steel
1.4301The most widely used austenitic stainless steel. Excellent corrosion resistance, good formability and weldability. Standard choice for food processing, chemical, and architectural applications.
316L
1.4404Low-carbon austenitic stainless steel with molybdenum addition. Superior corrosion resistance to 304, especially against chlorides and pitting. Standard choice for chemical processing, marine, medical implants, and pharmaceutical equipment.
430 Stainless Steel
1.4016Ferritic chromium stainless steel with good corrosion resistance and formability. Lower cost than austenitic grades. Used for automotive trim, kitchen sinks, architectural panels, and appliance components.
Not sure which material fits?
🤖 Ask AI Advisor →All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.