15-5PH / X5CrNiCuNb15-5 vs X2CrNiMoCuN25-6-3: 45% composition overlap. Significantly different materials serving different application areas.
15-5PH / X5CrNiCuNb15-5 vs X2CrNiMoCuN25-6-3
Side-by-side chemical composition and mechanical property comparison.
Overview
15-5PH / X5CrNiCuNb15-5
1.4545
Martensitic precipitation-hardening stainless steel. Similar to 17-4PH but with better transverse ductility and toughness due to lower delta ferrite. Used for aerospace structural components, nuclear reactor parts, food processing equipment, and high-performance fasteners.
X2CrNiMoCuN25-6-3
1.4507
Super duplex stainless steel — SAF 2507 / UNS S32750. PREN >40 giving outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking in chloride environments including hot seawater. 50/50 austenite-ferrite microstructure. UTS >800 MPa — roughly 2x the strength of 316L. Used for offshore oil/gas, desalination, chemical tankers, flue gas desulfurization, and subsea equipment.
| 15-5PH / X5CrNiCuNb15-5 | X2CrNiMoCuN25-6-3 | |
|---|---|---|
| Material Number | 1.4545 | 1.4507 |
| Category | Stainless Steel | Stainless Steel |
| Standard | AMS 5659 | EN 10088-3 |
Chemical composition (wt%)
| Element | 15-5PH / X5CrNiCuNb15-5 | X2CrNiMoCuN25-6-3 | Overlap |
|---|---|---|---|
| C | 0–0.07% | 0–0.03% | OK |
| Si | 0–1% | 0–0.8% | OK |
| Mn | 0–1% | 0–1.2% | OK |
| P | 0–0.03% | 0–0.035% | OK |
Mechanical properties
| Property | 15-5PH / X5CrNiCuNb15-5 | X2CrNiMoCuN25-6-3 | Unit |
|---|---|---|---|
| tensile_strength | ≥ 1310 | ≥ 800 | MPa |
| yield_strength | ≥ 1170 | ≥ 530 | MPa |
| elongation | ≥ 10 | ≥ 20 | % |
Compatibility Assessment
15-5PH / X5CrNiCuNb15-5 and X2CrNiMoCuN25-6-3 have significantly different compositions (45% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 15-5PH / X5CrNiCuNb15-5 the same as X2CrNiMoCuN25-6-3?
15-5PH / X5CrNiCuNb15-5 and X2CrNiMoCuN25-6-3 have a 45% composition overlap. They are generally not directly interchangeable.
Can I replace 15-5PH / X5CrNiCuNb15-5 with X2CrNiMoCuN25-6-3?
Generally not recommended. The compositions differ significantly (45% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 15-5PH / X5CrNiCuNb15-5 and X2CrNiMoCuN25-6-3?
The main differences are in the following elements: Cr, Ni, Cu. 15-5PH / X5CrNiCuNb15-5 is a Stainless Steel grade, while X2CrNiMoCuN25-6-3 is a Stainless Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.