16MnCrS5 vs 60SiCr7: 19% composition overlap. Significantly different materials serving different application areas.
16MnCrS5 vs 60SiCr7
Side-by-side chemical composition and mechanical property comparison.
Overview
16MnCrS5
1.7139
Free-cutting variant of 16MnCr5 (1.7131) — sulfur addition (0.020-0.040%) for improved machinability on CNC automatics. Same case-hardening properties: surface 60-62 HRC after carburizing. THE high-volume automotive gear steel where machining cost matters. Used for transmission gears, shafts, pinions, and other carburized parts produced on CNC lathes and multi-spindle automatics.
60SiCr7
1.7108
Silicon-chromium valve spring steel — the highest fatigue life among EN 10089 spring steels. High Si (1.50-1.80%) provides excellent resistance to relaxation at elevated temperatures (up to ~250°C). Superior to 51CrV4 for high-stress, high-cycle applications. Used for automotive valve springs, heavy-duty coil springs, torsion bars, and stabilizers. ≈ AISI 9260.
| 16MnCrS5 | 60SiCr7 | |
|---|---|---|
| Material Number | 1.7139 | 1.7108 |
| Category | Alloy Steel | Alloy Steel |
| Standard | EN 10084 | EN 10089 |
Chemical composition (wt%)
| Element | 16MnCrS5 | 60SiCr7 | Overlap |
|---|---|---|---|
| C | 0.14–0.19% | 0.57–0.65% | No overlap |
| Si | 0–0.4% | 1.5–1.8% | No overlap |
| Mn | 1–1.3% | 0.7–1% | Partial |
| P | 0–0.025% | 0–0.025% | OK |
Mechanical properties
| Property | 16MnCrS5 | 60SiCr7 | Unit |
|---|---|---|---|
| hardness_hrc | 60–62 | — | HRC |
| tensile_strength | 700–1000 | 1200–1400 | MPa |
| yield_strength | 450–700 | 1050–1200 | MPa |
Compatibility Assessment
16MnCrS5 and 60SiCr7 have significantly different compositions (19% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 16MnCrS5 the same as 60SiCr7?
16MnCrS5 and 60SiCr7 have a 19% composition overlap. They are generally not directly interchangeable.
Can I replace 16MnCrS5 with 60SiCr7?
Generally not recommended. The compositions differ significantly (19% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 16MnCrS5 and 60SiCr7?
The main differences are in the following elements: C, Si, Mn, S. 16MnCrS5 is a Alloy Steel grade, while 60SiCr7 is a Alloy Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.