23MnB4 vs 25CrMo4: 42% composition overlap. Significantly different materials serving different application areas.
23MnB4 vs 25CrMo4
Side-by-side chemical composition and mechanical property comparison.
Overview
23MnB4
1.5535
Cold-heading boron steel — optimized for cold forming of high-strength fasteners. Boron gives hardenability equivalent to much more expensive Cr-Mo alloys. Supplied spheroidized for cold heading, then quenched+tempered after forming. Property class 10.9 bolts are commonly made from this grade. Used for high-strength bolts (M8-M24), screws, studs, and threaded fasteners for automotive and construction.
25CrMo4
1.7218
Medium-carbon chromium-molybdenum steel with good toughness and weldability. Used for seamless tubes, pressure vessels, aircraft structural parts, and automotive components. Better weldability than 42CrMo4 due to lower carbon.
| 23MnB4 | 25CrMo4 | |
|---|---|---|
| Material Number | 1.5535 | 1.7218 |
| Category | Alloy Steel | Alloy Steel |
| Standard | EN 10263-4 | EN 10083-3 |
Chemical composition (wt%)
| Element | 23MnB4 | 25CrMo4 | Overlap |
|---|---|---|---|
| C | 0.2–0.27% | 0.22–0.29% | Partial |
| Si | 0–0.4% | 0–0.4% | OK |
| Mn | 0.8–1.1% | 0.6–0.9% | Partial |
| P | 0–0.025% | 0–0.025% | OK |
Mechanical properties
| Property | 23MnB4 | 25CrMo4 | Unit |
|---|---|---|---|
| tensile_strength | 830–1040 | 700–900 | MPa |
| yield_strength | 660–830 | ≥ 500 | MPa |
| elongation | 9–14 | ≥ 14 | % |
Compatibility Assessment
23MnB4 and 25CrMo4 have significantly different compositions (42% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is 23MnB4 the same as 25CrMo4?
23MnB4 and 25CrMo4 have a 42% composition overlap. They are generally not directly interchangeable.
Can I replace 23MnB4 with 25CrMo4?
Generally not recommended. The compositions differ significantly (42% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between 23MnB4 and 25CrMo4?
The main differences are in the following elements: C, Mn. 23MnB4 is a Alloy Steel grade, while 25CrMo4 is a Alloy Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.