A2 / X100CrMoV5 vs X40CrMoV5-1: 28% composition overlap. Significantly different materials serving different application areas.
A2 / X100CrMoV5 vs X40CrMoV5-1
Side-by-side chemical composition and mechanical property comparison.
Overview
A2 / X100CrMoV5
1.2363
Air-hardening cold-work tool steel. Combines good wear resistance with excellent dimensional stability during heat treatment (minimal distortion). Used for punching/blanking dies, forming tools, shear blades, gauges, and precision tooling where low distortion is critical.
X40CrMoV5-1
1.2344
THE hot work tool steel — AISI H13 / JIS SKD61. 5% Cr + Mo + V for outstanding thermal fatigue resistance, red hardness above 40 HRC at 600°C, and excellent toughness. Air-hardening — uniform hardness in large sections with minimal distortion. Used for aluminum/zinc die casting dies, extrusion dies, forging dies, hot shear blades, and plastic molds. ESR grade available for critical applications.
| A2 / X100CrMoV5 | X40CrMoV5-1 | |
|---|---|---|
| Material Number | 1.2363 | 1.2344 |
| Category | Tool Steel | Tool Steel |
| Standard | EN ISO 4957 | EN ISO 4957 |
Chemical composition (wt%)
| Element | A2 / X100CrMoV5 | X40CrMoV5-1 | Overlap |
|---|---|---|---|
| C | 0.95–1.05% | 0.37–0.43% | No overlap |
| Si | 0.1–0.4% | 0.8–1.2% | No overlap |
| Mn | 0.4–0.8% | 0.2–0.5% | Partial |
| P | — | 0–0.03% | — |
Mechanical properties
| Property | A2 / X100CrMoV5 | X40CrMoV5-1 | Unit |
|---|---|---|---|
| hardness_hrc | 57–62 | 50–56 | HRC |
| hardness_hb | ≤ 229 | ≤ 235 | HB |
| e_modulus | ≥ 210 | ≥ 210 | GPa |
Compatibility Assessment
A2 / X100CrMoV5 and X40CrMoV5-1 have significantly different compositions (28% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is A2 / X100CrMoV5 the same as X40CrMoV5-1?
A2 / X100CrMoV5 and X40CrMoV5-1 have a 28% composition overlap. They are generally not directly interchangeable.
Can I replace A2 / X100CrMoV5 with X40CrMoV5-1?
Generally not recommended. The compositions differ significantly (28% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between A2 / X100CrMoV5 and X40CrMoV5-1?
The main differences are in the following elements: C, Si, Mn, Mo. A2 / X100CrMoV5 is a Tool Steel grade, while X40CrMoV5-1 is a Tool Steel grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.